Calculations on Enhancement of Polycrystalline Diamond Bits through Addition of Superhard Diamond-Reinforced Elements
Authors:
- Boranbay RatovBRBoranbay Ratov
- Miroslaw RuckiMiroslaw Rucki
- Boris FedorovBFBoris Fedorov
- Edvin HevorkianEdvin Hevorkian
- Zbigniew SiemiatkowskiZSZbigniew Siemiatkowski
- Samal MuratovaSMSamal Muratova
- Elmira OmirzakovaEOElmira Omirzakova
- Aidar KuttybayevAKAidar Kuttybayev
- Vladimir MechnikVMVladimir Mechnik
- Nikolai BondarenkoNBNikolai Bondarenko
Open Access
Abstract
The paper is dedicated to the enhancement of Polycrystalline Diamond Bits (PDC) designed for oil and gas industry. A novel diamond-reinforced composite was applied for cutting inserts, with the addition of 4 wt% chromium diboride to the WC-Co matrix. The addition of CrB2 ensured improvement of bending strength and fracture toughness by nearly 30% and 40%, respectively, and enhanced the diamond retention force. The efficiency of PDC bits was further improved by incorporating constructional features in both bottomhole and reaming parts. An analytical relationship between the feeding speed and geometrical parameters was found, including the wings and calibrating inserts numbers, as well as the rotational speed of the cutter. Under the conditions of rock fracture by reaming inserts, the approximate value of the required power was calculated.Keywords
Funding Information
- Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan (AP14869271)
This publication has 40 references indexed in Scilit:
- Optimized design and application of a directional reaming-while-drilling polycrystalline diamond compact bitEngineering Failure Analysis, 2019
- Composite material for instrumental applications based on micro powder Al2O3 with additives nano-powder SiCInternational Journal of Refractory Metals and Hard Materials, 2019
- Performance of polycrystalline diamond compact bit based on laboratory tests assuming geothermal well drillingGeothermics, 2019
- A Review of the Diamond Retention Capacity of Metal Bond MatricesMetals, 2018
- Influence of the Addition of Vanadium Nitride on the Structure and Specifications of a Diamond–(Fe–Cu–Ni–Sn) Composite SystemJournal of Friction and Wear, 2018
- Geometry and force modeling, and mechanical properties study of polycrystalline diamond compact bit under wearing condition based on numerical analysisAdvances in Mechanical Engineering, 2017
- Development of the model of petroleum well boreability with PDC bore bits for Uzen oilfield (the Republic of Kazakhstan)Eastern-European Journal of Enterprise Technologies, 2017
- Causes and conditions for reamer blade balling during hole enlargement while drilling2016
- Drilling Technology and Well Completion2015
- Rock Mass Rating2011