Thermal properties of diamond/Al composites by pressure infiltration: comparison between methods of coating Ti onto diamond surfaces and adding Si into Al matrix
Authors:
- 3 February 2016
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 35 (3) , 249-255
Abstract
This study was pertained to the effects of Ti coating on diamond surfaces and Si addition into Al matrix on the thermal conductivity (TC) and the coefficient of thermal expansion (CTE) of diamond/Al composites by pressure infiltration. The fracture surfaces, interface microstructures by metal electro‐etching and interfacial thermal conductance of the composites prepared by two methods were compared. The results reveal that Ti coating on diamond surfaces and only 12.2 wt% Si addition into Al matrix could both improve the interfacial bonding and increase the TCs of the composites. But the Ti coating layer introduces more interfacial thermal barrier at the diamond/Al interface compared to adding 12.2 wt% Si into Al matrix. The diamond/Al composite with 12.2 wt% Si addition exhibits maximum TC of 534 W·m −1 ·K −1 and a very low CTE of 8.9 × 10 −6 K −1 , while the coating Ti‐diamond/Al composite has a TC of 514 W·m −1 ·K −1 and a CTE of 11.0 × 10 −6 K −1 .Keywords
Funding Information
- National Natural Science Foundation of China (51274040)
- Fundamental Research Funds for the Central Universities (FRF‐TP‐10‐003B)
- National Natural Science Foundation of China (51274040)
- Fundamental Research Funds for the Central Universities (FRF-TP-10-003B)
This publication has 23 references indexed in Scilit:
- Enhanced thermal conductivity in diamond/aluminum composites: Comparison between the methods of adding Ti into Al matrix and coating Ti onto diamond surfaceSurface and Coatings Technology, 2013
- Diamond-Based Metal Matrix Composites for Thermal Management Made by Liquid Metal Infiltration — Potential and LimitsAdvanced Materials Research, 2008
- Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applicationsScripta Materialia, 2008
- On the influence of active element content on the thermal conductivity and thermal expansion of Cu–X (X=Cr, B) diamond compositesScripta Materialia, 2007
- Selective interfacial bonding in Al(Si)–diamond composites and its effect on thermal conductivityComposites Science and Technology, 2006
- Optimum conditions for pressureless infiltration of SiCp preforms by aluminum alloysJournal of Materials Processing Technology, 2000
- Diamond/Al metal matrix composites formed by the pressureless metal infiltration processJournal of Materials Research, 1993
- Thermal boundary resistanceReviews of Modern Physics, 1989
- Effective Thermal Conductivity of Composites with Interfacial Thermal Barrier ResistanceJournal of Composite Materials, 1987
- The Elastic and Thermo-elastic Properties of Composite MediaProceedings of the Physical Society. Section B, 1956