XHXinbo He

Xinbo He

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xinbo He has a total of 67 co-authors. Here are the top co-authors by number of shared publications:

  • Xuanhui Qu

    Beijing Advanced Innovation Center for Materials Genome Engineering, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing, P.R. China

    20 shared publications
  • Qian Liu

    School of Material Science and Engineering, University of Science and Technology Beijing, People’s Republic of China

    5 shared publications
  • Shubin Ren

    University of Science and Technology Beijing

    5 shared publications
  • Shaomin Lv

    Beijing GAONA Materials and Technology Co., Ltd., Beijing 100081, China

    4 shared publications
  • Chonglin Jia

    Science and Technology on Advanced High Temperature Structural Materials Laboratory Beijing Institute of Aeronautical Materials Beijing 100094 China

    3 shared publications
  • Lin Zhang

    Institute for Advanced Materials and Technology University of Science and Technology Beijing 30 Xue Yuan Road Beijing 100083 China

    3 shared publications

Latest Publications

  • Open Access

    Investigation on the Attainment of High-Density 316L Stainless Steel with Selective Laser Sintering

    by Pengfei Zhu, Xinbo He, Hongda Guan, Zijian Zhang, Tao Zhang, Xuanhui Qu

    Due to the low density of the green part produced by selective laser sintering (SLS), previous reports mainly improve the sample’s density through the infiltration of low-melting metals or using isostatic pressing technology. In this study, the feasibility of preparing high-density 316L stainless steel using 316L and epoxy resin E-12 as raw materials for SLS combined with debinding and sintering was investigated. The results indicated that in an argon atmosphere, high carbon and oxygen contents, along with the uneven distribution of oxygen, led to the formation of impurity phases such as metal oxides, including Cr2O3 and FeO, preventing the effective densification of the sintered samples. Hydrogen-sintered samples can achieve a high relative density exceeding 98% without losing their original design shape. This can be attributed to hydrogen’s strong reducibility (effectively reducing the carbon and oxygen contents in the samples, improving their distribution uniformity, and eliminating impurity phases) and hydrogen’s higher thermal conductivity (about 10 times that of argon, reducing temperature gradients in the sintered samples and promoting better sintering). The microstructure of the hydrogen-sintered samples consisted of equiaxed austenite and ferrite phases. The samples exhibited the highest values of tensile strength, yield strength, and elongation at 1440 °C, reaching 513.5 MPa, 187.4 MPa, and 76.1%, respectively.


  • Open Access

    Preparation of W-Plated Diamond and Improvement of Thermal Conductivity of Diamond-WC-Cu Composite

    by Xulei Wang, Xinbo He, Zhiyang Xu, Xuanhui Qu

    The tungsten (W)-plated diamond process was explored and optimized. A dense and uniform tungsten coating with a thickness of 900 nm was successfully prepared by the powder covering sintering method. The Diamond-WC-Cu composite with high density and high thermal conductivity were successfully prepared by cyclic vacuum pressure infiltration. The microstructure and composition of the W-plated diamond particles were analyzed. The effect of tungsten coating on the microstructure and thermal conductivity of the Diamond-WC-Cu composite was investigated. After calculation, the interface thermal resistance of the composite forming the tungsten carbide transition layer is 2.11 × 10−8 m2∙K∙W−1. The thermal conductivity average value of the Diamond-WC-Cu composite with a diamond volume fraction of 60% reaches 874 W∙m−1∙K−1, which is close to the theoretical prediction value of Hasselman-Johnson (H-J) model and differential effective medium (DEM) model. Moreover, the Maxwell-Eucken (M-E) model, H-J model, and DEM model were used to evaluate the thermal conductivity of the Diamond-WC-Cu composite.


  • Open Access

    Investigation on Sub-Solvus Recrystallization Mechanisms in an Advanced γ-γ’ Nickel-Based Superalloy GH4151

    by Shaomin Lv, Jinbin Chen, Xinbo He, Chonglin Jia, Kang Wei, Xuanhui Qu

    Sub-solvus dynamic recrystallization (DRX) mechanisms in an advanced γ-γ’ nickel-based superalloy GH4151 were investigated by isothermal compression experiments at 1040 °C with a strain rate of 0.1 s−1 and various true strain of 0.1, 0.3, 0.5, and 0.7, respectively. This has not been reported in literature before. The electron backscatter diffraction (EBSD) and transmission electron microscope (TEM) technology were used for the observation of microstructure evolution and the confirmation of DRX mechanisms. The results indicate that a new dynamic recrystallization mechanism occurs during hot deformation of the hot-extruded GH4151 alloy. The nucleation mechanism can be described as such a feature, that is a primary γ’ (Ni3(Al, Ti, Nb)) precipitate embedded in a recrystallized grain existed the same crystallographic orientation, which is defined as heteroepitaxial dynamic recrystallization (HDRX). Meanwhile, the conventional DRX mechanisms, such as the discontinuous dynamic recrystallization (DDRX) characterized by bulging grain boundary and continuous dynamic recrystallization (CDRX) operated through progressive sub-grain merging and rotation, also take place during the hot deformation of the hot-extruded GH4151 alloy. In addition, the step-shaped structures can be observed at grain boundaries, which ensure the low-energy surface state during the DRX process.


  • Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Novel Nickel‐Based Superalloy

    by Shaomin Lv, Chonglin Jia, Xinbo He, Zhipeng Wan, Yang Li, Xuanhui Qu

    The hot deformation characteristics of a novel nickel‐based superalloy is investigated via the isothermal compression test in temperature range of 1000–1150 °C and strain rate of 0.001–10 s−1 under the true strain of 0.8. The hot deformation characteristics of GH4065 alloy are studied here for the first time. Based on the flow stress data, it is observed the typical features of flow curves exhibit the occurrence of dynamic recrystallization (DRX) during the hot deformation process. The constitutive equation in the Arrhenius‐type model is established, and activation energy (Q) is determined as 844.787 kJ mol−1. The microstructure evolution and DRX mechanism are investigated by electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM) technique. The results reveal that the fraction of low angle grain boundaries (LAGBs) decrease gradually with the increase in deformation temperature, whereas the fraction of Σ3 boundaries increase first and then decrease. For γ + γ′ dual‐phase region, the particle‐induced DRX (PIDRX), characterized by the generation of sub‐grains accelerated by γ′ precipitates pinning dislocations, and discontinuous dynamic recrystallization (DDRX) are the dominant nucleation mechanism of DRX. For γ quasi‐phase region and γ single‐phase region, the occurrence of bulged grain boundaries with twins further illustrates that DDRX plays a more significant role.


  • Effect of Preannealing on Microstructural Evolution and Tensile Properties of a Novel Nickel‐Based Superalloy

    by Shaomin Lv, Chonglin Jia, Xinbo He, Zhipeng Wan, Zheng Chen, Xuanhui Qu

    The effect of preannealing (PA) on microstructural evolution and tensile properties of a novel nickel‐based alloy GH4065 is investigated. Particularly, the study of PA in disc superalloys is reported herein for the first time. The detailed strengthening mechanisms of specimens under different heat treatment cycles are identified by electron backscatter diffraction (EBSD) and transmission electron microscope (TEM) observations. The results reveal that the PA treatment after deformation improves the homogeneity of the microstructure due to static recrystallization (SRX). Multimodal size distributions and the morphology of γ′ precipitates are found after the PA + solution + aging (PASA). Also, the distributions of secondary and tertiary γ′ precipitates are optimized due to the PA. The tensile strength of GH4065 alloy after PASA is higher than that of as‐forged (AF) alloy and solution + aging (SA) alloy attributed to the improved microstructure during PA treatment. Compared with the SA specimens, the specimens of GH4065 alloy after PASA treatment lead to significant strengthening as the yield strength increased to more than 150 MPa, which is mainly due to the contribution from annealing twins and microtwins strengthening, as well as the grain refinement and γ′ precipitation strengthening.


  • Open Access

    Superplastic Deformation and Dynamic Recrystallization of a Novel Disc Superalloy GH4151

    by Shaomin Lv, Chonglin Jia, Xinbo He, Zhipeng Wan, Xinxu Li, Xuanhui Qu

    The superplastic deformation of a hot-extruded GH4151 billet was investigated by means of tensile tests with the strain rates of 10−4 s−1, 5 × 10−4 s−1 and 10−3 s−1 and at temperatures at 1060 °C, 1080 °C and 1100 °C. The superplastic deformation of the GH4151 alloy was reported here for the first time. The results reveal that the uniform fine-grained GH4151 alloy exhibited an excellent superplasticity and high strain rate sensitivity (exceeded 0.5) under all experimental conditions. It was found that the increase of strain rate resulted in an increased average activation energy for superplastic deformation. A maximum elongation of 760.4% was determined at a temperature of 1080 °C and strain rate of 10−3 s−1. The average activation energy under different conditions suggested that the superplastic deformation with 1 × 10−4 s−1 in this experiment is mainly deemed as the grain boundary sliding controlled by grain boundary diffusion. However, with a higher stain rate of 5 × 10−4 s−1 and 1 × 10−3 s−1, the superplastic deformation is considered to be grain boundary sliding controlled by lattice diffusion. Based on the systematically microstructural examination using optical microscope (OM), SEM, electron backscatter diffraction (EBSD) and TEM techniques, the failure and dynamic recrystallization (DRX) nucleation mechanisms were proposed. The dominant nucleation mechanism of dynamic recrystallization (DRX) is the bulging of original grain boundaries, which is the typical feature of discontinuous dynamic recrystallization (DDRX), and continuous dynamic recrystallization (CDRX) is merely an assistant mechanism of DRX. The main contributions of DRX on superplasticity elongation were derived from its grain refinement process.


  • Open Access

    Improvement in Mechanical and Thermal Properties of Graphite Flake/Cu Composites by Introducing TiC Coating on Graphite Flake Surface

    by Ren Zhang, Xinbo He, Qian Liu, Xuanhui Qu

    In this work, TiC coating was successfully deposited on a graphite flake surface via molten salt technique, for the purpose of promoting the interfacial connection between Cu and graphite flake. Vacuum hot pressing was then employed to prepare TiC-coated graphite flake/Cu composite. The results indicate that introducing TiC coating on graphite flake surface can evidently reduce the pores and gaps at the interface, resulting in a significant improvement on the bending strength. When the TiC-coated graphite flake content is 60 vol%, the bending strength is increased by 58% compared with the uncoated one. The coefficient of thermal expansion dropped from 6.0 ppm·K−1 to 4.4 ppm·K−1, with the corresponding thermal conductivity as high as 571 W·m−1·K−1. The outstanding thermal conductivity, apposite coefficient of thermal expansion, as well as superior processability, make TiC-coated graphite flake/Cu composite a satisfactory electronic packaging material with vast prospect utilized in microelectronic industry.


  • Open Access

    Improvement of ZrC/Zr Coating on the Interface Combination and Physical Properties of Diamond-Copper Composites Fabricated by Spark Plasma Sintering

    by Yanpeng Pan, Xinbo He, Shubin Ren, Mao Wu, Xuanhui Qu

    In this study, diamond-copper composites were prepared with ZrC/Zr-coated diamond powders by spark plasma sintering. The magnetron sputtering technique was employed to coat the diamond particles with a zirconium layer. After heat treatment, most of the zirconium reacted with the surface of diamond and was transformed into zirconium carbide. The remaining zirconium on the zirconium carbide surface formed the outer layer. Owing to the method used to produce the ZrC/Zr-coated diamond in this study, the maximum thermal conductivity (TC) of 609 W·m−1·K−1 was obtained for 60 vol. % diamond-copper composites and the corresponding coefficient of thermal expansion (CTE) reached as low as 6.75 × 10−6 K−1. The bending strength of 40 vol. % ZrC/Zr-coated diamond-copper composites reached 255.95 MPa. The thermal and mechanical properties of ZrC/Zr-coated diamond-copper composites were substantially superior to those of uncoated diamond particles. Excellent properties can be attributed to the strengthening of the interfacial combination and the decrease in the interfacial thermal resistance due to the improvement associated with the ZrC/Zr coating. Theoretical analysis was also proposed to compare the thermal conductivities and CTE of diamond-copper composites fabricated with these two kinds of diamond powders.