Abstract
With the continuous increase in train speed, the influence of uneven wind pressure distribution on the surface of roof silicone rubber composite insulators on their insulation performance has become increasingly significant. To address the trade-off between improving wind pressure distribution and enhancing wind resistance performance of sheds under high-speed airflow, a multi-objective optimization method for roof silicone rubber composite insulators is proposed. First, the influence of shed deformation on wind pressure distribution is investigated by establishing a fluid-structure interaction (FSI) model. Then, the Pareto optimal solution set is obtained using Kriging surrogate model combined with the NSGA-II algorithm. Finally, the insulation and wind resistance performances are experimentally validated using 3D-printed roof insulators. Simulation results indicate that the maximum deformation occurs at the edge of the shed and increases exponentially with airflow speed. The deformation on the windward side is the most pronounced, and that of the large shed is greater than that of the small shed. The wind pressure distribution along the shed edge plays a dominant role in its deformation characteristics. When the airflow speed exceeds 80 m/s, the influence of shed deformation on the local wind pressure distribution should be considered. The optimized scheme increases the average wind pressure on the leeward side by more than 68.51% and reduces the maximum shed deformation by 19.74%. Experimental results further demonstrate that the optimized roof insulators exhibit a higher flashover voltage and significantly reduced shed shape variation, achieving a synergistic improvement in wind pressure distribution and wind resistance performance.
Funding Information
  • Sichuan Science and Technology Project (2022ZDZX0043)
  • National Natural Science Foundation of China (52277165)
  • National Natural Science Foundation of China (U24A20153)