Abstract
Centrifugal pumps are key energy-consuming equipment in marine engineering. Rotor-stator interaction (RSI) in diffuser centrifugal pumps causes severe pressure pulsation, vibration and energy loss, especially under variable marine conditions. Blade trailing edge (BTE) geometry dominates flow and vortex dynamics in the RSI region, yet its coupled mechanism with pressure wave propagation remains unclear. This study proposes two novel BTE designs: a fourth-order Bézier thin trailing edge (M1) and a 30 mm pressure-side fillet trailing edge (M2), investigated via CFD, closed-loop experiments, spatiotemporal pressure analysis and Ω vortex identification. Results show optimized BTEs improve static pressure distribution and flow uniformity, and suppress large-scale vortex clustering. M1 achieves the best pressure pulsation attenuation at the diffuser inlet, while M2 enhances efficiency by 0.9–1.2 percentage points under all conditions. A new RSI suppression mechanism is revealed: BTE optimization weakens vortex-induced disturbances and stabilizes pressure wave propagation. The proposed designs save 900–1200 kWh and reduce CO₂ emissions by 450–600 kg annually for a typical 15 kW marine pump. This work provides theoretical and practical guidance for high-efficiency, low-pulsation marine centrifugal pumps, supporting low-carbon and sustainable marine power systems.

This publication has 14 references indexed in Scilit: