A Clean Process to Prepare High-Quality Acid-Soluble Titanium Slag from Titanium Middling Ore
Open Access
Abstract
A direct reduction-magnetic separation-alkali leaching-dilute acid washing method was proposed to prepare high-quality acid-soluble titanium slag (HQASTS) from titanium middling ore. The relevant potential pH diagrams were built, and the analysis results showed that the pH values for alkali leaching and dilute acid washing should be higher than 13.50 and lower than 1.00, respectively. Increasing temperature was beneficial to alkali leaching but not to dilute acid washing. The effects of operating parameters on the TiO2 content and impurity oxides extraction ratios of titanium slag were investigated, and the optimal experimental conditions were obtained. The HQASTS was obtained with TiO2 and Fe2O3 content of 75.37 wt % and 0.96 wt %, respectively, under the above conditions. Furthermore, the leaching mechanism was studied by chemical analysis and X-ray diffraction (XRD) technology, and it was found that the alkali leaching-dilute acid washing process presented in this work could avoid the encapsulation of the unreacted anorthite by the calcium aluminum spinel generated in alkali leaching.Keywords
Funding Information
- Funding Project for National Science and Technology Support Program of China (2015BAB18B00)
This publication has 22 references indexed in Scilit:
- A novel method of synthesis and investigation on transformation of synthetic rutile powders from Panzhihua sulphate titanium slag using microwave heatingPowder Technology, 2018
- Preparation of synthetic rutile from high titanium slag using microwave heatingPhase Transitions, 2017
- Synthesis of Rutile TiO2 from Panzhihua Sulfate Titanium Slag by Microwave HeatingJOM, 2017
- Preparation of synthetic rutile via selective sulfation of ilmenite with (NH 4 ) 2 SO 4 followed by targeted removal of impuritiesChinese Journal of Chemical Engineering, 2017
- Combined production of synthetic rutile in the sulfate TiO2 processJournal of Alloys and Compounds, 2017
- Life cycle assessment of nano-sized titanium dioxide coating on residential windowsConstruction and Building Materials, 2013
- Upgrading a Ti-slag by a roast-leach processHydrometallurgy, 2012
- Nano/submicron-scale TiO2 network on titanium surface for dental implant applicationJournal of Alloys and Compounds, 2009
- Fabrication of TiO2 nanoparticles/surfactant polymer complex film on glassy carbon electrode and its application to sensing trace dopamineMaterials Science and Engineering: C, 2005
- Photoelectrochemical cellsNature, 2001