JHJiqing Han

Jiqing Han

*This is an algorithmically generated author record based on publicly available information.

Jiqing Han has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mechanism Research for the Influence of TiO2 Content on the Shape Transformation of Rutile Crystals

    by Jiqing Han, Li Zhang, Hongmei Yin, Qiuping Feng, Hongsheng Zhang

    The isothermal precipitation kinetics of rutile crystals was studied to clarify the mechanism for the influence of TiO2 content on the shape transformation of rutile crystals. The results indicate that the growth index n values were about 2, 3, and 4 when the TiO2 contents of the raw materials were 27, 37, and 47%, indicating that the precipitation of the rutile crystal had a one-dimensional, two-dimensional, and three-dimensional growth. Thus, the shapes of the rutile crystals were a cuboid, a cube, and a sphere when the TiO2 contents of the raw materials were 27, 37, and 47%. An increase in the TiO2 content of raw materials can encourage the transformation of rutile crystals into spheres, which is beneficial to the settling of rutile crystals in molten slag. It realizes the conversion of rutile from a lean ore to a rich ore and avoids subsequent beneficiation processes.


  • Open Access

    Clean preparation of rutile from Ti-containing mixed molten slag by CO 2 oxidation

    by Jiqing Han, Qiuping Feng, Li Zhang

    The effects of SiO 2 and CO 2 on the crystallization action of Ti-containing mixed molten slag (molten Ti-containing blast furnace slag and molten Ti slag) were discussed by thermodynamic calculation and specific experiments. The results of thermodynamic calculation indicated that the increase of SiO 2 addition mass and CO 2 oxidation time can promote the transformation of anosovite and sphene to rutile. The experiment results showed that the phase composition of modification slag was only rutile under the SiO 2 addition mass of 110 g and the CO 2 oxidation time of 180 s. Moreover, the formation theory of rutile was investigated. Using CO 2 as an oxidizing gas can not only prepare rutile but also achieve carbon neutrality, which is a clean preparation method.


  • Open Access

    A Clean Process to Prepare High-Quality Acid-Soluble Titanium Slag from Titanium Middling Ore

    by Jiqing Han, Jing Zhang, Wei Feng, Xiao Chen, Li Zhang, Ganfeng Tu

    A direct reduction-magnetic separation-alkali leaching-dilute acid washing method was proposed to prepare high-quality acid-soluble titanium slag (HQASTS) from titanium middling ore. The relevant potential pH diagrams were built, and the analysis results showed that the pH values for alkali leaching and dilute acid washing should be higher than 13.50 and lower than 1.00, respectively. Increasing temperature was beneficial to alkali leaching but not to dilute acid washing. The effects of operating parameters on the TiO2 content and impurity oxides extraction ratios of titanium slag were investigated, and the optimal experimental conditions were obtained. The HQASTS was obtained with TiO2 and Fe2O3 content of 75.37 wt % and 0.96 wt %, respectively, under the above conditions. Furthermore, the leaching mechanism was studied by chemical analysis and X-ray diffraction (XRD) technology, and it was found that the alkali leaching-dilute acid washing process presented in this work could avoid the encapsulation of the unreacted anorthite by the calcium aluminum spinel generated in alkali leaching.