Effect of soft segment composition on the physical properties of nonionic aqueous polyurethane containing side chain PEGME
Authors:
- 23 April 2007
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 105 (3) , 1391-1399
Abstract
In this study, a series of nonionic waterborne polyurethanes containing side chain poly(ethylene glycol) monomethyl ether (PEGME) were synthesized using 4,4‐methylene bis(isocyanatocyclohexane), the nonionic dispersing center produced by isophorone diisocyanate, N‐diethanol amine, and PEGME, and a series of soft segments [polyethylene glycol (PEG), polypropylene glycol (PPG), polytetramethylene glycol (PTMG), and polycaprolactone (PCL)] with a different molecular weight. The solution properties of the polyurethane (PU) dispersions, thermal properties of the PU casting films, and the water vapor permeability (WVP) of the PU coated fabrics were investigated. Our results show that the surface tension of PU dispersion and its contact angle to untreated nylon fabric are higher for the ether‐based PU dispersion than for the ester‐based PU dispersion, with a sequence of PEG‐PU ≫ PTMG‐PU ≫ PPG‐PU ≫ PCL‐PU. Both the surface tension and the contact angle between PU dispersion and nylon fabric increase upon increasing the Mw of the soft segment. As for the thermal property of PU film, the Tgs of PCL‐PU is the highest, followed by PEG‐PU, PTMG‐PU, and PPG‐PU, and the Tgs decreases with the increase in the length of the soft segment. The Tms follows the order: PEG‐PU ≫ PCL‐PU ≫ PPG‐PU ≫ PTMG‐PU, and the Tms increases upon increasing the soft segment length. As regard to PU coated fabric, the trend of WVP is PEG‐PU ≫ PTMG‐PU ≫ PPG‐PU ≫ PCL‐PU, which increases with the increasing the soft segment length. With regarding to application for the coating, the Coated‐PU with PEG‐PU has an excellent WVP. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007Keywords
This publication has 19 references indexed in Scilit:
- The physical properties of aqueous cationic–nonionic polyurethane with poly(ethylene glycol methyl ether) side chain and its blend with aqueous cationic polyurethaneJournal of Applied Polymer Science, 2006
- Polyurethane Cationomers with Azobenzene Side Groups in the Flexible Component. Synthesis, Characterization, and PropertiesPolymer Journal, 2001
- Syntheses of poly(ethylene oxide) polyurethane ionomersJournal of Applied Polymer Science, 2000
- Design of polypropylene oxide/polybutadiene bi-soft segment urethane/urea polymer for pervaporation membranesPolymer, 1999
- Mixture Design Approach to PEG−PPG−PTMG Ternary Polyol-Based Waterborne PolyurethanesIndustrial & Engineering Chemistry Research, 1997
- Effects of mixing procedure on the structure and physical properties of ester-ether-type soft segment waterborne polyurethaneJournal of Applied Polymer Science, 1996
- Water Resistant-Breathable Hydrophilic Polyurethane CoatingsJournal of Coated Fabrics, 1995
- Effect of soft segment length on the properties of polyurethane anionomer dispersionPolymer, 1994
- Polyurethane ionomers: effects of emulsification on properties of hexamethylene diisocyanate-based polyether polyurethane cationomersPolymer, 1988
- Thermoplastic urethane elastomers. I. Effects of soft-segment variationsJournal of Applied Polymer Science, 1975