Experimental Evaluation of Bond Strength between Setting Retarder Added Concrete and Normal Concrete
Open Access
- 9 March 2023
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2023, 1-9
Abstract
The large size concrete structures are continuously placed with time delay due to practical reasons. The bond strength between old concrete and new concrete is related with a performance of concrete structures. In order to investigate bond strength of slant shear specimens, the specimens (100 × 100 × 300 mm) were fabricated and tested. Two fractions of setting retarder (0% and 1%), surface roughness (none, brushed, and chipping), and curing hours (8, 16, 24, and 72 hours) were considered as variables. Failure modes, compressive strength, and displacement were measured to evaluate the bond strength of specimens. As a result, chipping treatment, which is commonly applied to increase the bond strength between old and new concrete, did not show significant increase of bond strength. The addition of retarder shows that the increased bond strength compared with the chipping treatment. The addition of the retarder in concrete shows sufficient bond strength after the previous placing of 16 hours. Furthermore, the retarder-added specimens with additional brushing treatment of concrete surfaces showed increase of bond strength more than the specimens without brushing. From the test results, it is confirmed that the addition of the retarder can be a new method to increase the bond strength of the concrete surface in continuous placement of concrete.Keywords
Funding Information
- Ministry of Land, Infrastructure and Transport (21SMIP-A158708-02, NRF-2020R1F1A 1050623)
- National Research Foundation of Korea (21SMIP-A158708-02, NRF-2020R1F1A 1050623)
This publication has 14 references indexed in Scilit:
- Behavior of steel clamp confined brick aggregate concrete circular columns subjected to axial compressionCase Studies in Construction Materials, 2022
- Interface strength of High-Strength concrete to Ultra-High-Performance concreteEngineering Structures, 2022
- Dynamic slant shear bond behavior between new and old concreteConstruction and Building Materials, 2020
- Slant shear bond strength between self compacting concrete and old concreteConstruction and Building Materials, 2017
- Effect of Fly Ash on the Durability Properties of High Strength ConcreteProcedia Engineering, 2011
- Correlation between concrete-to-concrete bond strength and the roughness of the substrate surfaceConstruction and Building Materials, 2007
- Comparison of methods for evaluating bond strength between concrete substrate and repair materialsCement and Concrete Research, 2005
- Concrete-to-concrete bond strength. Influence of the roughness of the substrate surfaceConstruction and Building Materials, 2004
- A new way to increase the long-term bond strength of new-to-old concrete by the use of fly ashCement and Concrete Research, 2003
- Durability of Portland blast-furnace slag cement concreteCement and Concrete Composites, 1999