Water-Based Yttria-Stabilized Nano-Zirconia Pastes for Direct Ink Writing of Dental Structures
Authors:
- Panagiota AngelopoulouPAPanagiota Angelopoulou
- Eleni RoussiEREleni Roussi
- Paraskevi GkomozaPGParaskevi Gkomoza
- Michaela PapageorgiouMPMichaela Papageorgiou
- Olga AlexiadouOAOlga Alexiadou
- Savvas KoltsakidisSKSavvas Koltsakidis
- Dimitris TzetzisDimitris Tzetzis
- Constantina-Dia AndreouliCAConstantina-Dia Andreouli
- Athena TsetsekouATAthena Tsetsekou
- Ioanna KitsouIKIoanna Kitsou
Open Access
Abstract
In this work, zirconia ceramic structures were fabricated by Direct Ink Writing (DIW) using water-based, yttria-stabilized nano-zirconia pastes. The pastes were prepared from 3 mol% yttria-stabilized zirconia nanopowders synthesized by sol–gel and co-precipitation routes. The effects of dispersant concentration and organic additives on paste preparation and printability were investigated, and the rheological behavior of the printable formulations was evaluated. The microstructure of the sintered 3D-printed specimens was examined by scanning electron microscopy (SEM), while apparent porosity, density, and compressive strength were determined. All printable pastes exhibited shear-thinning behavior. After sintering at 1500 °C, the printed specimens showed submicron grain sizes and apparent porosities as low as 3%. The formulation prepared without acrylamide and crosslinking agent (O12X) exhibited an apparent porosity of 3% and a compressive strength of 350 ± 25 MPa. The co-precipitated-powder formulation (2N) reached compressive-strength values of up to 360 ± 25 MPa. These results demonstrate the feasibility of using high-solids, water-based nano-zirconia pastes for DIW fabrication of dense zirconia structures and support further investigation of this approach for dental applications.Keywords
Funding Information
- European Regional Development Fund (Τ2ΕΔΚ-04124)
- European Regional Development Fund (3DENT)
This publication has 38 references indexed in Scilit:
- Comparison of properties and cost efficiency of zirconia processed by DIW printing, casting and CAD/CAM-millingDental Materials, 2023
- Direct ink writing of 3Y-TZP ceramics using PEG-Laponite® as additiveCeramics International, 2023
- Novel translucent monolithic zirconia fixed restorations in the esthetic zoneClinical Case Reports, 2022
- A comparison of the mechanical proprieties of different types of primary tooth restorations: an in vitro studyClinical Oral Investigations, 2022
- Robocasting of dense zirconia parts using commercial yttria-stabilized zirconia granules and ultrafine particles. Paste preparation, printing, mechanical propertiesCeramics International, 2022
- Suitability of 3D printed pieces of nanocrystalline zirconia for dental applicationsDental Materials, 2020
- Extrusion-based additive manufacturing of yttria-partially-stabilized zirconia ceramicsCeramics International, 2020
- Characterization of zirconia specimens fabricated by ceramic on-demand extrusionCeramics International, 2018
- Phase tuning of zirconia nanocrystals by varying the surfactant and alkaline mineralizerCeramics International, 2014
- An overview of zirconia ceramics: Basic properties and clinical applicationsJournal of Dentistry, 2007