In Situ and Low-Cost Improvement of the Lithium Anode Interface in Garnet-Type Solid-State Electrolytes
- 28 November 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (49) , 57828-57834
Abstract
In recent years, the development of electric vehicles and environmental concerns have made necessary improvements in the energy density and safety of lithium-ion batteries. Therefore, the development of all-solid-state lithium-ion batteries (ASSLIBs) has become imperative. One advantage of ASSLIBs is their potential for downsizing with the use of lithium metal as the anode. However, in this study, a garnet-type solid electrolyte (Li6.75La3Zr1.75Ta0.25O12) was used, which has low reactivity with lithium metal. Thus, interface modification using CaCl2 was employed to form a Li-Ca-Cl composite anode. The interfacial resistance was remarkably reduced to 7 Ω cm2, and the symmetric cell exhibited stable cycling for 1200 h at room temperature and a current density of 0.1 mA cm-2. The voltage ranged from ±15 to ±16 mV. The full cell demonstrated a high initial discharge capacity of 149.2 mA h g-1 and a Coulombic efficiency of 98.0% while maintaining a discharge capacity retention of 91.3% after 100 cycles. These findings lay a solid foundation for future commercial applications as interface modification was achieved through a simple spin-coating process using low-cost CaCl2 (0.7 USD g-1).Keywords
Funding Information
- Advanced Research Center for Green Materials Science and Technology, National Taiwan University (112L9006)
- National Science and Technology Council (NSTC 110-2112-M-003-016, NSTC 112-2113-M-002-020)
This publication has 35 references indexed in Scilit:
- Effects of Li source on microstructure and ionic conductivity of Al-contained Li6.75La3Zr1.75Ta0.25O12 ceramicsJournal of the European Ceramic Society, 2015
- Densification and ionic-conduction improvement of lithium garnet solid electrolytes by flowing oxygen sinteringJournal of Power Sources, 2014
- Structure and dynamics of the fast lithium ion conductor “Li7La3Zr2O12”Physical Chemistry Chemical Physics, 2011
- Challenges for Rechargeable Li BatteriesChemistry of Materials, 2009
- Synthesis and structure analysis of tetragonal Li7La3Zr2O12 with the garnet-related type structureJournal of Solid State Chemistry, 2009
- Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12Angewandte Chemie International Edition, 2007
- Directions in secondary lithium battery research and developmentElectrochimica Acta, 1993
- Lithium insertion into Fe2(SO4)3 frameworksJournal of Power Sources, 1989
- Lithium insertion into manganese spinelsMaterials Research Bulletin, 1983
- LixCoO2 (0<x<-1): A new cathode material for batteries of high energy densityMaterials Research Bulletin, 1980