Evaluation and prediction of frictional behavior of AA 2024 based hybrid composites using ANN model
- 11 August 2022
- journal article
- conference paper
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 237 (4) , 843-859
Abstract
The paper investigates the frictional behavior of AA 2024 hybrid aluminum matrix composites reinforced with Zirconium dioxide (ZrO2) and Graphite (Gr). The hybrid composite is fabricated by stir casting technique by using fixed 6 wt. % of ZrO2 and varying 1.5, 3.0 and 4.5 wt. % of Gr reinforcement. The test specimens were fabricated in the form of pins to carryout frictional testing by using Pin-on-disc tribometer under dry and lubricated conditions. Tests were conducted at 15 N load corresponding to 2000 m sliding distance and varying sliding speed of 1 m/s, 2 m/s, 3 m/s and 4 m/s. Coefficient of Friction (COF) increased with the increase in sliding speed for both dry and lubricated conditions but hybrid composite with 3.0 and 4.5 wt. % showed a decrease in COF at 4 m/s sliding speed under lubricated conditions. At higher sliding speed, greater amount of frictional heat is developed which leads to the softening of Gr particles and a solid lubricant layer of Gr along with Polyalphaolefin(PAO) oil reduces the metal-to-metal contact and thus reduces the COF. Maximum COF was observed for 1.5 wt. % Gr reinforcement under dry condition whereas under lubricated conditions pure AA 2024 resulted in maximum COF. Artificial Neural Network (ANN) technique was used for predicting the friction behavior and the confirmatory tests were also performed corresponding to sliding speed of 5 m/s. From the investigations it was revealed that the error in predicted and experimental results is in the acceptable range.Keywords
This publication has 27 references indexed in Scilit:
- Analysis of tribological behaviour of zirconia reinforced Al-SiC hybrid composites using statistical and artificial neural network techniqueMaterials Research Express, 2018
- A Brief Research Review for Improvement Methods the Wettability between Ceramic Reinforcement Particulate and Aluminium Matrix CompositesIOP Conference Series: Materials Science and Engineering, 2017
- Dry sliding wear studies of aluminum matrix hybrid compositesResource-Efficient Technologies, 2016
- Effect of Graphite on Tribological and Mechanical Properties of AA7075 CompositesTribology Transactions, 2014
- Tribological properties of powder metallurgy – Processed aluminium self lubricating hybrid composites with SiC additionsMaterials & Design (1980-2015), 2013
- Effect of the SiC Content on the Tribological Properties of Hybrid Al/Gr/SiC Composites Processed by In Situ Powder Metallurgy (IPM) MethodAdvanced Materials Research, 2011
- Effect of SiC content on the processing, compaction behavior, and properties of Al6061/SiC/Gr hybrid compositesJournal of Materials Science, 2010
- Tribological behavior of graphite-containing nickel-based composite as function of temperature, load and counterfaceWear, 2009
- Thermomechanical Analysis of Elastoplastic Bodies in a Sliding Spherical Contact and the Effects of Sliding Speed, Heat Partition, and Thermal SofteningJournal of Tribology, 2008
- Metal matrix composites: production by the stir casting methodJournal of Materials Processing Technology, 1999