A Compact High-Efficiency Boost Converter With Time-Based Control, RHP Zero-Elimination, and Tracking Error Compensation
- 16 November 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (3) , 3100-3113
Abstract
Time-based signal processing has been recently demonstrated to be more area- and power-efficient compared with traditional analog based, making it an interesting approach for the design of compact high-efficiency dc–dc converters for portable applications. This work presents a novel boost converter, with a time-based control, a scheme for right-half plane (RHP) zero mitigation requiring no extra power switch nor external capacitor, and a pulse frequency modulation (PFM) operating mode with steady-state error correction and seamless PFM-to-continuous conduction mode (CCM) transition. The prototype implemented in a 0.18- $\mu$ m bipolar-CMOS-DMOS (BCD) process generates an output voltage of 5 V from an input voltage ranging between 2.5 and 4.5 V, and has an 800-mA load current capability. The controller area occupation is 0.27 mm $^{2}$ and the quiescent current in CCM is 300 $\mu$ A for the controller and 40 $\mu$ A for the tracking error compensation. The peak efficiency is 96 $\%$ at 4.5-V input and above 90 $\%$ at light loads down to 50 mA current. Compared with a peak-current mode control, both the controller area and the current consumption of the proposed time-based architecture are lower by about 40%. The achieved closed-loop bandwidth of 130 kHz is six times larger than in a conventional boost converter with RHP zero.Keywords
This publication has 25 references indexed in Scilit:
- Mitigation of Positive Zero Effect on Nonminimum Phase Boost DC–DC Converters in CCMIEEE Transactions on Industrial Electronics, 2017
- Analysis and Implementation of a High-Performance-Integrated KY ConverterIEEE Transactions on Power Electronics, 2017
- Two-Phase Interleaved Inverse-Coupled Inductor Boost Without Right Half-Plane ZerosIEEE Transactions on Power Electronics, 2016
- A low-volume hybrid step-down dc-dc converter based on the dual use of flying capacitor2016
- A 4-Phase 30–70 MHz Switching Frequency Buck Converter Using a Time-Based CompensatorIEEE Journal of Solid-State Circuits, 2015
- High Frequency Buck Converter Design Using Time-Based Control TechniquesIEEE Journal of Solid-State Circuits, 2014
- A Multiphase Buck Converter With a Rotating Phase-Shedding Scheme For Efficient Light-Load ControlIEEE Journal of Solid-State Circuits, 2014
- Input/Output Current Ripple Cancellation and RHP Zero Elimination in a Boost Converter using an Integrated Magnetic TechniqueIEEE Transactions on Power Electronics, 2014
- A novel current sensing circuit for Boost DC-DC converter2012
- Loop gain analysis and development of high-speed high-accuracy current sensors for switching converters2004