The use of 3D in‐mold decoration technology to form a film with printed circuits
Authors:
- 5 August 2020
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 60 (10) , 2517-2528
Abstract
In‐mold decoration is an integrated process for plastic processes, such as printing, hot pressing, and injection molding. The process has simpler steps, the production time is shorter, products are more durable, and manufacturing costs are less than traditional methods. In‐mold decoration is affected by shape, mold design and the parameters for forming, and cracking, wrinkling or stress concentration can occur. A large curvature can produce cracks and wrinkles. This study designs a series of experimental methods for film forming, hot press forming, and injection molding. The effects of various features on the quality of the hot press forming and injection molding processes are determined. A three‐dimensional film forming process uses pressure thermoforming technology to form either without pretensioning, with pretensioning, and with local heating. The local heating method gives the best results. For injection molding processes, the mold temperature, the melt temperature, the injection speed, and the holding pressure are the parameters. The injection molding process is optimized using the Taguchi method, and the factor with the highest contribution is determined to be the holding pressure. The conductive line of the finished in‐mold decoration product can be formed smoothly by hot pressing using local heating, and the measured resistors are almost the same after each process.Keywords
Funding Information
- Ministry of Science and Technology (MOST 107‐2221‐E‐992‐048)
This publication has 16 references indexed in Scilit:
- Direct-print/cure as a molded interconnect device (MID) process for fabrication of automobile cruise controllersJournal of Mechanical Science and Technology, 2015
- A review on 3D printed bioimplantsInternational Journal of Precision Engineering and Manufacturing, 2015
- Direct micro-joining of flexible printed circuit and metal electrode by pulsed Nd:YAG laserInternational Journal of Precision Engineering and Manufacturing, 2012
- Direct Transfer Patterning of Electrically Small Antennas onto Three‐Dimensionally Contoured SubstratesAdvanced Materials, 2012
- Effect of cavity surface coating and molding parameters on pressure drop: Developing a new software for rapid calculationsPolymer Engineering & Science, 2011
- Sub-micro to nanometer scale laser direct writing techniques with a contact probeInternational Journal of Precision Engineering and Manufacturing, 2011
- Conformal Printing of Electrically Small Antennas on Three‐Dimensional SurfacesAdvanced Materials, 2011
- Low-Q Electrically Small Spherical Magnetic Dipole AntennasIEEE Transactions on Antennas and Propagation, 2010
- Direct metal printing of 3D electrical circuit using rapid prototypingInternational Journal of Precision Engineering and Manufacturing, 2009
- Effects of the molecular orientation and crystallization on film–substrate interfacial adhesion in poly(ethylene terephthalate) film‐insert moldingsJournal of Applied Polymer Science, 2007