Abstract
Compression helical springs are critical components in pressure control systems. However, classical analytical formulations present significant limitations by not accounting for effects such as contact, friction, and geometric non-linearities, which can lead to substantial errors in stiffness prediction. This study addresses this issue through an experimental and numerical characterisation of a compression helical spring made from EN 10270-1 SH steel, designed for use in pressure control valves. The elastic constant was determined experimentally by means of standardised tensile tests (ASTM E8/E8M), yielding a value of k = 42.38 N/mm and a restoring force of F = 423.80 N. These values were compared with the results of analytical models (classical theory and Wahl's correction) and with finite element simulations under linear and non-linear static configurations with self-contact (code NE3, μ = 0.15). The results show that the classical formulation overestimates stiffness by 8.28%, whilst Wahl's correction underestimates it by 16.26%. Case NE3 provides the closest agreement with the experimental values, confirming its suitability for modelling helical springs under axial load. It was further verified that the spring operates within the elastic regime throughout the entire range of compression analysed. The methodology developed constitutes a reliable tool for the design of such components in pressure-regulation systems.

This publication has 7 references indexed in Scilit: