The Effect of Elastic Strain and Small Plastic Deformation on Tensile Strength of a Lean Al–Mg–Si Alloy
Open Access
Abstract
Al–Mg–Si alloys are usually formed into their final shape by rolling or extrusion. After extrusion, the aluminium profiles are usually straightened, causing the material to be subjected to a small plastic deformation. This study demonstrates the positive effect on strength that can be obtained from such small deformation levels or from only elastically straining the material. Elastic straining of a lean Al–Mg–Si alloy, when performed immediately after solution heat treatment, enhances the material yield strength after artificial ageing to T6. Transmission electron microscopy shows that this effect can be attributed to a higher number density and finer dispersion of the age-hardening precipitate needles. Furthermore, introducing a small plastic deformation of 1% after solution heat treatment results in a comparable strength increase to elastically straining the material. In this case, however, the strength increase is due to the increased dislocation density, which compensates for a lower density of precipitate needles. Finally, by combining plastic deformation with a succeeding elastic strain, we demonstrate how elastic strain can cause an on-set of dislocation cell formation in this material.Keywords
Funding Information
- Norges Forskningsråd (219371, 197405)
- Hydro Aluminium AS (219371)
This publication has 34 references indexed in Scilit:
- Three-dimensional characterization of interaction between β″ precipitate and dislocation in Al–Mg–Si alloyJournal of Alloys and Compounds, 2014
- The influence of composition and natural aging on clustering during preaging in Al–Mg–Si alloysJournal of Applied Physics, 2010
- Three-Dimensional Atom Probe Characterization of Nanoclusters Responsible for Multistep Aging Behavior of an Al-Mg-Si AlloyMetallurgical and Materials Transactions A, 2008
- The shearable–non-shearable transition in Al–Mg–Si–Cu precipitation hardening alloys: implications on the distribution of slip, work hardening and fracturePhilosophical Magazine, 2005
- The influence of alloy composition on precipitates of the Al-Mg-Si systemMetallurgical and Materials Transactions A, 2005
- The influence of temperature and storage time at RT on nucleation of the β″ phase in a 6082 Al–Mg–Si alloyActa Materialia, 2003
- Atomic model for GP-zones in a 6082 Al–Mg–Si systemActa Materialia, 2001
- Pre-precipitate clusters and precipitation processes in Al–Mg–Si alloysActa Materialia, 1999
- Structure Determination of Mg 5 Si 6 Particles in Al by Dynamic Electron Diffraction StudiesScience, 1997
- The Composition of Fine-Scale Precipitates in Al-Mg-Si AlloysMaterials Science Forum, 1996