Self-Exited Oscillation in a Combustion Chamber Driven by Phase Change in the Liquid Fuel Feed System
Authors:
- C. HassaC. Hassa
- J. HeinzeJHJ. Heinze
- U. MeierUMU. Meier
- Ph TrunkPTPh Trunk
- A. DreizlerADA. Dreizler
Open Access
- 1 December 2011
- journal article
- Published by SAGE Publications in International Journal of Spray and Combustion Dynamics
- Vol. 3 (4) , 273-284
Abstract
A new mechanism for the generation of a self-exited oscillation of combustion in a generic combustion chamber typical for aeroengine combustors is described. The cause of the oscillation is the phase change from liquid to vapour which happens when the preheat temperature of the air flowing through the burner exceeds the boiling temperature at the operating pressure and the fuel flow is so low that heat transfer to the liquid fuel causes evaporation within the fuel channels of the burner. Liquid fuel and vapour alternatively enter the airstream of the burner. This leads to an unstable situation for the flame. Measurements of chemiluminescence and liquid fuel show nearly complete extinction and re-ignition for the limit cycle. Prevention of the oscillation is possible by better thermal management of the fuel path.Keywords
This publication has 4 references indexed in Scilit:
- Off-line phase-averaged particle image velocimetry and OH chemiluminescence measurements using acoustic time seriesMeasurement Science and Technology, 2009
- PLANAR LIQUID SHEET BREAKUP OF PREFILMING AND NONPREFILMING ATOMIZERS AT ELEVATED PRESSURESAtomization and Sprays, 2009
- Response of Spray and Heat Release to Forced Air Flow Fluctuations in a Gas Turbine Combustor at Elevated Pressure2007
- One-dimensional tomography: a comparison of Abel, onion-peeling, and filtered backprojection methodsApplied Optics, 1992