Meso-scale approach to modeling concrete subjected to thermo-mechanical loading
Authors:
- Peter GrasslPGPeter Grassl
- Chris J. PearceCPChris J. Pearce
Preprint
Abstract
Concrete subjected to combined compressive stresses and temperature loading exhibits compressive strains, which are considerably greater than for concrete subjected to compressive stresses alone. This phenomenon is called transient thermal creep or load induced thermal strain and is usually modeled by macroscopic phenomenological constitutive laws which have only limited predictive capabilities. In the present study a meso-scale modeling approach is proposed in which the macroscopically observed transient thermal creep results from the mismatch of thermal expansions of the meso-scale constituents. The meso-structure of concrete is idealized as a two-dimensional three phase material consisting of aggregates, matrix and interfacial transition zones (ITZ). The nonlinear material response of the phases are described by a damage-plasticity interface model. The meso-scale approach was applied to analyze compressed concrete specimens subjected to uniform temperature histories and the analysis results were compared to experimental results reported in the literature.Keywords
All Related Versions
This publication has 36 references indexed in Scilit:
- Interface damage model for thermomechanical degradation of heterogeneous materialsComputer Methods in Applied Mechanics and Engineering, 2004
- Gradient enhanced thermo‐mechanical damage model for concrete at high temperatures including transient thermal creepInternational Journal for Numerical and Analytical Methods in Geomechanics, 2004
- Modelling of deformations of high strength concrete at elevated temperaturesMaterials and Structures, 2004
- Modelling of elastic continua using a grillage of structural elements based on discrete element conceptsInternational Journal for Numerical Methods in Engineering, 2001
- Transient creep of concrete under biaxial stress and high temperatureCement and Concrete Research, 1996
- New method for simulating fracture using an elastically uniform random geometry latticeInternational Journal of Engineering Science, 1996
- Simple lattice model for numerical simulation of fracture of concrete materials and structuresMaterials and Structures, 1992
- Concrete at high temperatures — A general reviewFire Safety Journal, 1988
- On the multiaxial behaviour of concrete exposed to high temperatureNuclear Engineering and Design, 1983
- Elastic moduli of a cracked solidInternational Journal of Solids and Structures, 1976