PGPeter Grassl

Peter Grassl

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Peter Grassl has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Meso-scale approach to modeling concrete subjected to thermo-mechanical loading

    by Peter Grassl, Chris J. Pearce

    Concrete subjected to combined compressive stresses and temperature loading exhibits compressive strains, which are considerably greater than for concrete subjected to compressive stresses alone. This phenomenon is called transient thermal creep or load induced thermal strain and is usually modeled by macroscopic phenomenological constitutive laws which have only limited predictive capabilities. In the present study a meso-scale modeling approach is proposed in which the macroscopically observed transient thermal creep results from the mismatch of thermal expansions of the meso-scale constituents. The meso-structure of concrete is idealized as a two-dimensional three phase material consisting of aggregates, matrix and interfacial transition zones (ITZ). The nonlinear material response of the phases are described by a damage-plasticity interface model. The meso-scale approach was applied to analyze compressed concrete specimens subjected to uniform temperature histories and the analysis results were compared to experimental results reported in the literature.

  • Open Access

    Analysis of the microbond test using nonlinear fracture mechanics

    by Jan Novak, Chris J. Pearce, Peter Grassl, Liu Yang, James Thomason

    Microbond tests composed of single fibre and matrix droplet are often used to determine the properties of fibre reinforced composites. Interfacial shear strength is quantified by the maximum pull-out force assuming a uniform stress distribution along the fibre. Here, nonlinear finite element analyses are performed to investigate the validity of this assumption.

  • Open Access

    Meso-scale approach to modelling the fracture process zone of concrete subjected to uniaxial tension

    by Peter Grassl, Milan Jirasek

    A meso-scale analysis is performed to determine the fracture process zone of concrete subjected to uniaxial tension. The meso-structure of concrete is idealised as stiff aggregates embedded in a soft matrix and separated by weak interfaces. The mechanical response of the matrix, the inclusions and the interface between the matrix and the inclusions is modelled by a discrete lattice approach. The inelastic response of the lattice elements is described by a damage approach, which corresponds to a continuous reduction of the stiffness of the springs. The fracture process in uniaxial tension is approximated by an analysis of a two-dimensional cell with periodic boundary conditions. The spatial distribution of dissipated energy density at the meso-scale of concrete is determined. The size and shape of the deterministic FPZ is obtained as the average of random meso-scale analyses. Additionally, periodicity of the discretisation is prescribed to avoid influences of the boundaries of the periodic cell on fracture patterns. The results of these analyses are then used to calibrate an integral-type nonlocal model.

  • Open Access

    On a damage-plasticity approach to model concrete failure

    by Peter Grassl

    A damage-plasticity constitutive model for the description of fracture in plain concrete is presented. Two approaches, the local model comprising the adjustment of the softening modulus and the nonlocal model based on spatial averaging of history variables, are applied to the analysis of a concrete bar subjected to uniaxial tension and to a three-point bending test. The influence of mesh size and the decomposition into damage and plasticity components are discussed. It is shown that for the two examples studied, both approaches result in mesh-independent results. However, the nonlocal model, which relies on spatial averaging of history variables, exhibits sensitivity with respect to boundary conditions, which requires further studies.

  • Open Access

    A parametric study of the meso-scale modelling of concrete subjected to cyclic compression

    by Rasmus Rempling, Peter Grassl

    The present parametric study deals with the meso-scale modelling of concrete subjected to cyclic compression, which exhibits hysteresis loops during unloading and reloading. Concrete is idealised as a two-dimensional three-phase composite made of aggregates, mortar and interfacial transition zones (ITZs). The meso-scale modelling approach relies on the hypothesis that the hysteresis loops are caused by localised permanent displacements, which result in nonlinear fracture processes during unloading and reloading. A parametric study is carried out to investigate how aggregate density and size, amount of permanent displacements in the ITZ and the mortar, and the ITZ strength influence the hysteresis loops obtained with the meso-scale modelling approach.

  • Open Access

    Influence of aggregate size and volume fraction on shrinkage induced micro-cracking of concrete and mortar

    by Peter Grassl, Hong S. Wong, Nick R. Buenfeld

    In this paper, the influence of aggregate size and volume fraction on shrinkage induced micro-cracking and permeability of concrete and mortar was investigated. Nonlinear finite element analyses of model concrete and mortar specimens with regular and random aggregate arrangements were performed. The aggregate diameter was varied between 2 and 16 mm. Furthermore, a range of volume fractions between 0.1 and 0.5 was studied. The nonlinear analyses were based on a 2D lattice approach in which aggregates were simplified as monosized cylindrical inclusions. The analysis results were interpreted by means of crack length, crack width and change of permeability. The results show that increasing aggregate diameter (at equal volume fraction) and decreasing volume fraction (at equal aggregate diameter), increases crack width and consequently greatly increases permeability.