Overview of the laboratory tests for geoenvironmental characterisation of construction and demolition waste
- 5 April 2025
- journal article
- review article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 32 (17) , 10725-10748
Abstract
This paper presents a comprehensive database on the morphological, mineralogical, chemical, and contaminant release characteristics of construction and demolition waste (CDW). Scanning Electron Microscopy (SEM) was employed to analyse the particle morphology, revealing their angular and porous nature. X-ray Diffraction (XRD) was used to identify key minerals, such as quartz, calcite, and gypsum, providing vital information on the mineralogical composition of CDW. X-ray Fluorescence (XRF) analysis allowed the characterisation of the elemental composition, highlighting predominant oxides, like SiO₂, Al₂O₃, and CaO, with a notable presence of Na₂O in glass waste. Critical oxides, such as Fe₂O₃ (8.78%) and MgO (14.19%), were also identified. Recycled aggregates exhibited higher porosity and water absorption compared to natural aggregates, with fines constituting less than 27%, which presents an opportunity for their reuse, particularly in the production of geopolymers. Organic matter content was low, reaching up to 4.6%. The main contaminants identified include arsenic, cadmium, lead, chromium, and sulphates, with sulphate concentrations reaching up to 6,000 mg/kg, while arsenic, chromium, and lead reach up to 28 mg/kg, 310 mg/kg, and 6,580 mg/kg, respectively. These findings support the adoption of circular economy principles and regulatory frameworks that promote recycling and the use of innovative materials, thereby reducing the environmental footprint of construction projects.Keywords
This publication has 82 references indexed in Scilit:
- Enhancing the physical performance of concrete containing construction and demolition waste against the effects of accelerated carbonation and chloride ingressionJournal of Building Pathology and Rehabilitation, 2024
- An overview of in situ testing and geophysical methods to investigate municipal solid waste landfillsEnvironmental Science and Pollution Research, 2023
- Construction and demolition waste recycling in developing cities: management and cost analysisEnvironmental Science and Pollution Research, 2022
- An Experimental Study on the Valorization of Crushed Concrete in Pavement Base and Sub-Base Applications2021
- Recycling of construction and demolition waste and its impact on climate change and sustainable developmentInternational Journal of Environmental Science and Technology, 2021
- Geotechnical Behavior of Construction Waste (CW) as a Partial Replacement of a Lateritic Soil in Fiber-Reinforced Cement MixturesGeotechnical and Geological Engineering, 2020
- Valorization of Fine-Grain Construction and Demolition (C&D) Waste in Geosynthetic Reinforced StructuresWaste and Biomass Valorization, 2018
- Characterizing the environmental impact of metals in construction and demolition wasteEnvironmental Science and Pollution Research, 2018
- Characterization and environmental risk assessment of heavy metals in construction and demolition wastes from five sources (chemical, metallurgical and light industries, and residential and recycled aggregates)Environmental Science and Pollution Research, 2015
- Characterization of wastes from construction and demolition sectorEnvironmental Monitoring and Assessment, 2014