Johana Marcela Carmona Wilches
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Johana Marcela Carmona Wilches has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Giulliana Mondelli
Sao Paulo State University
2 shared publications - Roger Augusto Rodrigues
Department of Civil and Environmental Engineering, São Paulo State University (UNESP), Av. Eng. Luiz Edmundo Carrijo Coube 14-01, Bauru 17033-360 São Paulo, Brazil
2 shared publications - Ana Paula Do Nascimento
Universidade Estadual Paulista "Júlio de Mesquita Filho", Brazil
1 shared publication - Paloma Santos Wolf De Mattos
Universidade Estadual Paulista "Júlio de Mesquita Filho", Brazil
1 shared publication
Latest Publications
- 5 April 2025
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 32 (17) , 10725-10748
Overview of the laboratory tests for geoenvironmental characterisation of construction and demolition waste
This paper presents a comprehensive database on the morphological, mineralogical, chemical, and contaminant release characteristics of construction and demolition waste (CDW). Scanning Electron Microscopy (SEM) was employed to analyse the particle morphology, revealing their angular and porous nature. X-ray Diffraction (XRD) was used to identify key minerals, such as quartz, calcite, and gypsum, providing vital information on the mineralogical composition of CDW. X-ray Fluorescence (XRF) analysis allowed the characterisation of the elemental composition, highlighting predominant oxides, like SiO₂, Al₂O₃, and CaO, with a notable presence of Na₂O in glass waste. Critical oxides, such as Fe₂O₃ (8.78%) and MgO (14.19%), were also identified. Recycled aggregates exhibited higher porosity and water absorption compared to natural aggregates, with fines constituting less than 27%, which presents an opportunity for their reuse, particularly in the production of geopolymers. Organic matter content was low, reaching up to 4.6%. The main contaminants identified include arsenic, cadmium, lead, chromium, and sulphates, with sulphate concentrations reaching up to 6,000 mg/kg, while arsenic, chromium, and lead reach up to 28 mg/kg, 310 mg/kg, and 6,580 mg/kg, respectively. These findings support the adoption of circular economy principles and regulatory frameworks that promote recycling and the use of innovative materials, thereby reducing the environmental footprint of construction projects.
- 5 April 2025
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 32 (17) , 10725-10748
Overview of the laboratory tests for geoenvironmental characterisation of construction and demolition waste
This paper presents a comprehensive database on the morphological, mineralogical, chemical, and contaminant release characteristics of construction and demolition waste (CDW). Scanning Electron Microscopy (SEM) was employed to analyse the particle morphology, revealing their angular and porous nature. X-ray Diffraction (XRD) was used to identify key minerals, such as quartz, calcite, and gypsum, providing vital information on the mineralogical composition of CDW. X-ray Fluorescence (XRF) analysis allowed the characterisation of the elemental composition, highlighting predominant oxides, like SiO₂, Al₂O₃, and CaO, with a notable presence of Na₂O in glass waste. Critical oxides, such as Fe₂O₃ (8.78%) and MgO (14.19%), were also identified. Recycled aggregates exhibited higher porosity and water absorption compared to natural aggregates, with fines constituting less than 27%, which presents an opportunity for their reuse, particularly in the production of geopolymers. Organic matter content was low, reaching up to 4.6%. The main contaminants identified include arsenic, cadmium, lead, chromium, and sulphates, with sulphate concentrations reaching up to 6,000 mg/kg, while arsenic, chromium, and lead reach up to 28 mg/kg, 310 mg/kg, and 6,580 mg/kg, respectively. These findings support the adoption of circular economy principles and regulatory frameworks that promote recycling and the use of innovative materials, thereby reducing the environmental footprint of construction projects.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Engenharia Sanitaria e Ambiental
- Vol. 30
Combustion mass loss proceedings for solid waste: some results for MSW and CDW in Brazil
This paper presents some recommendations and results regarding the procedures used for combustion mass loss tests to characterize municipal solid waste (MSW) and construction and demolition waste (CDW), since there are no specific standards for solid waste in Brazil. A total of 35 MSW samples were obtained at different depths from a closed MSW disposal site and four CDW samples were collected from a processing plant, both located in Bauru, State of São Paulo, Brazil. Moisture content was analyzed at 65°C and 105°C for 24 h, organic matter (OM) at 440 ± 5°C for 12 h, ash content (Ac) at 550 ± 10°C for 1 h, and volatile matter (VM) at 950 ± 20°C. MSW exhibited high variability in moisture content (47.9–88.8%), while OM and Acs were stable (12.0–15.2% and 12.9–15.7%, respectively) and VM ranged from 13.1 to 16.8%. CDW showed lower OM (1.9%) and Ac (3.4%), on average. The findings contribute to the base data for combustion mass loss for waste characterization, aiming at the circularity of environmental resources.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Engenharia Sanitaria e Ambiental
- Vol. 30
Open AccessCombustion mass loss proceedings for solid waste: some results for MSW and CDW in Brazil
This paper presents some recommendations and results regarding the procedures used for combustion mass loss tests to characterize municipal solid waste (MSW) and construction and demolition waste (CDW), since there are no specific standards for solid waste in Brazil. A total of 35 MSW samples were obtained at different depths from a closed MSW disposal site and four CDW samples were collected from a processing plant, both located in Bauru, State of São Paulo, Brazil. Moisture content was analyzed at 65°C and 105°C for 24 h, organic matter (OM) at 440 ± 5°C for 12 h, ash content (Ac) at 550 ± 10°C for 1 h, and volatile matter (VM) at 950 ± 20°C. MSW exhibited high variability in moisture content (47.9–88.8%), while OM and Acs were stable (12.0–15.2% and 12.9–15.7%, respectively) and VM ranged from 13.1 to 16.8%. CDW showed lower OM (1.9%) and Ac (3.4%), on average. The findings contribute to the base data for combustion mass loss for waste characterization, aiming at the circularity of environmental resources.