Abstract
Fragile surface textures limit the durability of superhydrophobic coatings for concrete protection in cold regions. Here, we developed a polyurea-silicone composite coating containing dodecyltriethoxysilane-modified silicon carbide particles distributed throughout the matrix. Sanding the cured surface exposed the embedded particles, creating a water-repellent texture. The optimized coating combined a water contact angle of approximately 151° and a roll-off angle of 9° with a tensile strength of 5.7 MPa and a toughness of 4.86 MJ·m−3. Superhydrophobicity persisted throughout 500 sandpaper abrasion cycles, with water contact angles remaining between 150° and 152°. Pull-off tests yielded an apparent bond strength of approximately 2.39 MPa, with cohesive failure within the mortar substrate. Compared with uncoated mortar, the coating reduced ice shear adhesion strength from approximately 1240 to 37 kPa and extended the time required for complete droplet freezing at −18 °C from 24 to 266 s. Ice shear strength remained approximately 50 kPa after 50 icing–deicing cycles, while tensile properties showed negligible changes after 100 freeze–thaw cycles. These findings show that embedding hydrophobic particles throughout a flexible polymer matrix can combine abrasion-resistant superhydrophobicity, low ice adhesion, and mechanical durability, offering a route to protective coatings for hydraulic concrete in cold regions.