Influence of heat flux and surface temperature on the intergranular corrosion of stainless steel
- 9 May 2005
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 56 (5) , 312-317
Abstract
The exposure tests followed by metallographic evaluation and the electrochemical reactivation measurements in double‐loop (DL‐EPR) modification were used for investigation of the influence of non‐boiling heat transfer on initiation and rate of propagation of intergranular corrosion (IGC) of sensitized austenitic stainless steel EN 1.4301 (AISI 304) in sulfuric acid solutions. The influence of heat flux and surface temperature was ascertained separately. The susceptibility to IGC and the rate of crack propagation increased with the surface temperature. Heat flux from metal to solution at constant surface temperature facilitated the IGC initiation, but at the same time it caused a drop of the corrosion attack depth in the metal. The increase of the heat flux by 10 kW m−2 in a range from 0 to 42 kW m−2 led to a drop of the maximum depth of cracks formed after subsequent bending the specimen, in average by 8%. The overall danger of corrosion was lower at positive heat flux between metal and solution than under isothermal conditions at constant surface temperature of the metal. The intensification of heat flux by 10 kW m−2 had the same effect on the IGC as a change of the surface temperature by less than 2 K. Therefore, the effect of the heat flux on IGC of the heat exchangers operating under non‐boiling conditions may be considered as relatively less important than the effect of the surface temperature.Keywords
This publication has 8 references indexed in Scilit:
- Initiation and propagation of stainless steel pitting corrosion under heat fluxMaterials and Corrosion, 2003
- Schwingungsrißkorrosionsverhalten des Duplexstahles X 2 CrNiMoN 22 5 3 unter definierten WärmeübergangsbedingungenMaterialwissenschaft und Werkstofftechnik, 1995
- New electrochemical cell for pitting corrosion testingCorrosion Science, 1988
- Corrosion of stainless steels under heat transfer conditions in nitric acidBritish Corrosion Journal, 1986
- Corrosion Behavior of 18-8 Stainless Steels in Hot Concentrated Caustic Soda Solutions under Heat-Transfer ConditionsCorrosion, 1985
- Corrosion and Heat Transfer — A Review*British Corrosion Journal, 1967
- The corrosion of austenitic stainless steels under heat transfer in high temperature waterJournal of Nuclear Materials, 1959
- Laboratory Methods for Determining Corrosion Rates Under Heat Flux ConditionsCorrosion, 1959