High Voltage Design Strategies for Gallium Oxide Power Devices
- 12 August 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Semiconductor Manufacturing
- Vol. 38 (4) , 758-764
Abstract
This study employs drift-diffusion simulation to investigate key factors influencing the performance of β-Ga2O3 FinFETs, demonstrating that enhancement-mode behaviour (Vth 0) is achievable for β-Ga2O3 FinFET using a Fin width WFIN≤0.5 μm and doping concentration Nd≤1×101 cmtextsuperscript-. Breakdown voltage and output/transfer characteristics are calculated by using drift-diffusion methodology calibrated by experiments. We found that the metal work function (ms), dielectric constant (κ), and unintentional negative interface charge density (-Qf) at the β-Ga2O3/dielectric interface significantly impact Vth, with a high ms being necessary for enhancement mode (E-mode) operation. To achieve 5kV breakdown, a WFIN of 200 nm requires a fin thickness (TFIN) of 0.8 μm, a WFIN of 400 nm requires TFIN1.2 μm, and a WFIN 600 nm requires TFIN 2 μm. From WFIN of 200 nm to 400 nm, DIBL (drain induced barrier lowering, i.e. Vth /Vds) increases by 300%, while from 400 to 600 nm, it rises by only 100%. The presence of -Qf enhances the breakdown voltage by mitigating DIBL-related failure mechanisms and by redistributing the electric potential away from the gate dielectric and deeper into the β-Ga2O3 drift region. A controllable and relatively defect-free process was developed for Ga2O3 metal-insulator-semiconductor (MIS) structures, enabling improved interface quality. Capacitance–voltage measurements and progressive annealing studies demonstrate enhanced device stability and reduced hysteresis for the proposed FinFET application. Finally, an optimised β-Ga2O3 fin etch process was developed on the KLA SPTS SynapsEtchmodule for Ga2O3 technology integration.Keywords
Funding Information
- Horizon SAFEPOWER Project (101172940)
- UKRI Strength in Places Fund (107134)
- Swansea University, KLA Corporation, SIPF
- CSconnected Ltd
This publication has 19 references indexed in Scilit:
- Increase fixed charge at Al2O3/Ga2O3 interface for high-performance Ga2O3 trench Schottky barrier diodes by atomic nitrogen treatmentApplied Physics Letters, 2025
- A Low‐Temperature Batch Process for the Deposition of High‐Quality Conformal Alumina Thin Films for Electronic ApplicationsAdvanced Engineering Materials, 2023
- Leakage and breakdown mechanisms of GaN vertical power FinFETsApplied Physics Letters, 2019
- The origin of negative charging in amorphous Al2O3 films: the role of native defectsNanotechnology, 2019
- Chlorine-based inductive coupled plasma etching of α -Ga 2 O 3Semiconductor Science and Technology, 2019
- Breakdown mechanism in 1 kA/cm2 and 960 V E-mode β-Ga2O3 vertical transistorsApplied Physics Letters, 2018
- Impact ionization in β-Ga2O3Journal of Applied Physics, 2018
- Ab initio velocity-field curves in monoclinic β-Ga2O3Journal of Applied Physics, 2017
- Drift-Diffusion Equations2009
- Evidence of low interface trap density in GeO2∕Ge metal-oxide-semiconductor structures fabricated by thermal oxidationApplied Physics Letters, 2008