Piezoresistive graphite/polyimide thin films for micromachining applications
Authors:
- 1 May 1993
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 73 (9) , 4428-4433
Abstract
In this work, graphite/polyimide composite thin films are introduced and characterized for micromachining applications. The material consists of submicron‐sized graphite particles suspended in a benzophenone tetracarboxylic dianhydride–oxydianiline/metaphenylene diamine polyimide matrix. The resultant material represents a low cost, plasma‐definable polyimide material which has been found to have a large piezoresistive coefficient over a range of graphite loadings. Selected film properties: Young’s modulus, residual stress, and piezoresistivity are investigated for a graphite loading range of 15%–25% by weight using a slightly modified in situ load/deflection technique. Results of mechanical property characterization show that the residual stress is independent of graphite loading and the Young’s modulus increases with increasing graphite loading. The maximum piezoresistive coefficient (gage factor) is 16.8 and occurs at a graphite loading of 18%.Keywords
This publication has 10 references indexed in Scilit:
- Mechanical property measurements of thin films using load-deflection of composite rectangular membranesSensors and Actuators, 1989
- Determination of poisson's ratio for polyimide filmsPolymer Engineering & Science, 1989
- Integrated movable micromechanical structures for sensors and actuatorsIEEE Transactions on Electron Devices, 1988
- Novel microstructures for the i n s i t u measurement of mechanical properties of thin filmsJournal of Applied Physics, 1987
- Microfabricated structures for the i n s i t u measurement of residual stress, Young’s modulus, and ultimate strain of thin filmsApplied Physics Letters, 1987
- A simple technique for the determination of mechanical strain in thin films with applications to polysiliconJournal of Applied Physics, 1985
- A technique for the determination of stress in thin filmsJournal of Vacuum Science & Technology B, 1983
- Stress in polycrystalline and amorphous silicon thin filmsJournal of Applied Physics, 1983
- Polycrystalline and amorphous silicon micromechanical beams: annealing and mechanical propertiesSensors and Actuators, 1983
- Young’s modulus measurements of thin films using micromechanicsJournal of Applied Physics, 1979