Influence of Ultrasonic Burnishing Technique on Surface Quality and Change in the Dimensions of Metal Shafts
Authors:
Open Access
- 12 November 2014
- journal article
- research article
- Published by Hindawi Limited in Journal of Engineering
- Vol. 2014, 1-8
Abstract
This paper presents ultrasonic burnishing as a mechanical surface treatment for improving the quality of rotating shafts. Ultrasonic burnishing is a modern method for finishing workpieces to produce a good surface quality. This process improves the surface quality and increases the surface hardness of the workpiece, and the surface roughness of the workpiece improves. As a result, wear resistance and fatigue life increase. Furthermore, these improvements are achieved without expensive equipment or long processing times. In this paper the influence of the ultraburnishing technique on the change in diameter and its effects on the out-of-roundness of rotating shafts are investigated. This paper also takes a look at the magnitudes of the improvement of the surface roughness as a result of using ultrasonic burnishing. Three different materials, aluminium, 34-CrNiMo6 tempering steel, and S355J2 structural steel, are examined. The results showed that ultrasonic burnishing is a treatment that improves the quality of components. Ultrasonic burnishing also has a reducing effect on the final diameter and out-of-roundness and increases the hardness of the workpiece. It can also be stated that the material of the workpiece does not have a significant effect on the magnitude of the reduced surface roughness values.Keywords
This publication has 9 references indexed in Scilit:
- Selection Of Optimal Process Parameters In Ball Burnishing Of Titanium AlloyMachining Science and Technology, 2014
- Integrity of surfaces finished with ultrasonic burnishingProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012
- Surface improvement of shafts by the deep ball-burnishing techniqueSurface and Coatings Technology, 2012
- Improvements in out-of-roundness and microhardness of inner surfaces by internal ball burnishing processJournal of Materials Processing Technology, 2008
- Quality improvement of ball-end milled sculptured surfaces by ball burnishingInternational Journal of Machine Tools and Manufacture, 2005
- Deep cold rolling with ultrasonic vibrations—a new mechanical surface enhancement techniqueInternational Journal of Machine Tools and Manufacture, 2005
- Ultrasonic machining of alumina-based ceramic compositesJournal of the European Ceramic Society, 2002
- Influence of burnishing process on surface roughness, hardness, and microstructure of some non-ferrous metalsWear, 1996
- Out-of-roundness problem revisitedIEEE Transactions on Pattern Analysis and Machine Intelligence, 1991