Abstract
The strength properties of gypsum composites modified under introducing flax fibers - vegetable raw materials of the Altai Territory are considered. It is shown that linen fiber, under scientifically substantiated conditions of its preparation, can serve as a promising raw material to obtain molding gypsum masses, suitable after their hardening for construction work inside buildings and structures. A difference was found in the physical and mechanical properties of composites based on gypsum of grades G-3 and G-16, characterized by varied structural density. The effect of the degree of grinding of the reinforcing additive on the strength properties of gypsum composites and materials based thereon has been established. Medium or fine grinding of the linen fiber with a length of ≤3 mm on a disk mill, while limiting its addition in a gypsum composition G-3 B II increases its flexural strength up to 20-50%, and its compressive strength - up to 80%. It was revealed that the introduction of >1% of reinforcing fiber into high-strength gypsum of G-16 grade is impractical. Otherwise, the effect of excessive porosity begins to prevail over the effect of environmental friendliness, cheaper and expected reduction in the material consumption of the building composite.

This publication has 13 references indexed in Scilit: