Two-Dimensional LDV Measurement, Modeling, and Optimal Design of Rectangular Primary Settling Tanks
- 1 May 2010
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 136 (5) , 501-507
Abstract
To optimize the design parameters of rectangular primary settling tanks, we used two-dimensional laser Doppler velocimetry (2D LDV) to conduct flow field measurements in five cases and used a previous model to simulate the flow field. The relative baffle submergence height and the ratio of tank length to height were optimized in a low suspended solid (LSS) concentration . The experimental and simulation results show that a large recirculation zone exists behind the reaction baffle and the flow magnitude is small in the recirculation region; the length of recirculation increases with an increasing flow rate; the length of recirculation increases as the depth of the submerged reaction baffle increases; and the variation of the reaction baffle height can affect the flow field more significantly than does the variation of the flow rate. We also determined that to reach a higher removal rate and to optimize the area dimensions of a sedimentation tank, a length-to-height design ratio between 8 and 12 is optimal.
Keywords
This publication has 15 references indexed in Scilit:
- Two-Dimensional Numerical Simulation of Primary Settling Tanks by Hybrid Finite Analytic MethodJournal of Environmental Engineering, 2008
- Modeling of Class I Settling TanksJournal of Environmental Engineering, 2000
- Tornado Vortices in Settling TanksJournal of Environmental Engineering, 2000
- Operating diagnostics on a flocculator-settling tank using fluent cfd softwareWater Science & Technology, 1999
- Velocity and solids distribution in circular secondary clarifiers: Full scale measurements and numerical modellingWater Research, 1998
- NUMERICAL MODELLING AND MEASUREMENT IN A TEST SECONDARY SETTLING TANKWater Science & Technology, 1994
- Density Currents and Shear‐Induced Flocculation in Sedimentation TanksJournal of Hydraulic Engineering, 1992
- Turbulence Measurements in Model Settling TankJournal of Hydraulic Engineering, 1990
- Modeling Sediment‐Induced Density Currents in Sedimentation BasinsJournal of Hydraulic Engineering, 1987
- Numerical Modeling of Sedimentation TanksJournal of Hydraulic Engineering, 1983