Design Methodology of DC Power Cycling Test Setup for SiC MOSFETs
Open Access
- 1 May 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 8 (4) , 4144-4159
Abstract
The long-term reliability concerns regarding the latest power devices, e.g. SiC MOSFETs, need to be well-understood for their rapid and widespread deployment in industrial applications. As an effective reliability assessment, DC power cycling test is one of the most realistic procedures providing accelerated lifetime tests. In this paper, a DC power cycling setup for SiC power MOSFETs is proposed, and the design methodology is generalized for practicing engineers. At first, the aging-independent junction temperature measurement method is identified to eliminate the laborious re-calibration process. Specifically, the electrical parameter changes of commercial SiC MOSFETs are evaluated in a power cycling test. It is observed experimentally that the body diode’s voltage drop at low current and negative gate bias is unaffected by the device/package degradation. Therefore, it is selected for.... measurement in the proposed setup. Following that, the design considerations regarding precise parameter measurement of the device’s parameter are presented. The transient behavior of the proposed test setup is analyzed, and a simulation model is built in LTspice. Based on the model, the effects of gate timing control and paralleled capacitors are investigated for realizing accurate measurements, and the simulation results are verified experimentally in a prototype. In addition, considering the measurement delay in the conditioning circuits and the common-mode noise, the practical issues affecting the measurement accuracy in a multiple-phase setup are investigated in the experiment. Experimental results show that an accurate measurement can be achieved with the design considerations.Keywords
Funding Information
- National Science Foundation (1454311)
- Semiconductor Research Corporation (SRC)/Texas Analog Center of Excellence (2712.026)
- Texas Instruments Foundational Technology Research Center on Power Density (1806417)
This publication has 32 references indexed in Scilit:
- Power cycling methods for SiC MOSFETs2017
- A Physical RC Network Model for Electrothermal Analysis of a Multichip SiC Power ModuleIEEE Transactions on Power Electronics, 2017
- Aging Precursor Identification and Lifetime Estimation for Thermally Aged Discrete Package Silicon Power SwitchesIEEE Transactions on Industry Applications, 2016
- Power cycling issues and challenges of SiC-MOSFET power modules in high temperature conditionsMicroelectronics Reliability, 2016
- An accelerated thermal aging platform to monitor fault precursor on-state resistance2015
- Basic Mechanisms of Threshold-Voltage Instability and Implications for Reliability Testing of SiC MOSFETsIEEE Transactions on Electron Devices, 2014
- Power Cycle Testing of Power Switches: A Literature SurveyIEEE Transactions on Power Electronics, 2014
- Practical investigation of the gate bias effect on the reverse recovery behavior of the body diode in power MOSFETs2014
- Real-Time Temperature Estimation for Power MOSFETs Considering Thermal Aging EffectsIEEE Transactions on Device and Materials Reliability, 2013
- Temperature dependent Pspice model of silicon carbide power MOSFET2012