Compressibility of 304 Stainless Steel Powder Metallurgy Materials Reinforced with 304 Short Stainless Steel Fibers
Open Access
Abstract
Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass ratio. In this paper, the compressive properties of the P/M materials were characterized by a series of uniaxial compression tests. The effects of fiber content, compaction pressure and high temperature nitriding on compressive properties were investigated. The results indicated that, without nitriding, the samples changed from cuboid to cydariform without damage in the process of compression. The compressive stress was enhanced with increasing fiber content ranging from 0 to 8 wt.%. For compaction pressure from 55 to 75 MPa, greater compaction pressure improved compressive stress. Moreover, high temperature nitriding was able to significantly improve the yield stress, but collapse failure eventually occurred.Keywords
Funding Information
- National Nature Science Foundations of China (51274103)
- Special Project of National Development and Reform Commission (ChinaGrid2011636)
This publication has 31 references indexed in Scilit:
- The shear properties and deformation mechanisms of porous metal fiber sintered sheetsMechanics of Materials, 2014
- Effect of porosity and density on the mechanical and microstructural properties of sintered 316L stainless steel implant materialsMaterials & Design (1980-2015), 2014
- Relationship between Compressive Strength and Fractal Dimension of Pore StructureRare Metal Materials and Engineering, 2013
- Effects of sintering atmosphere on microstructure and mechanical property of sintered powder metallurgy 316L stainless steelMaterials & Design (1980-2015), 2013
- The mechanical behavior of porous metal fiber sintered sheetsJournal of the Mechanics and Physics of Solids, 2013
- Progress of Application Researches of Porous Fiber MetalsMaterials, 2011
- Experimental investigation on uniaxial tensile properties of high-porosity metal fiber sintered sheetMaterials Science and Engineering: A, 2009
- Porous Metals and Metallic Foams: Current Status and Recent DevelopmentsAdvanced Engineering Materials, 2008
- Determination of the matrix in situ flow stress of a continuous fibre reinforced metal matrix composite using instrumented indentationMaterials Science and Engineering: A, 2004
- The mechanical behaviour of porous austenitic stainless steel fibre structuresJournal of Materials Science, 1978