Effect of Sb Content on the Microstructure and Mechanical Properties of Eutectic SnPb Solder
Open Access
Abstract
SnPb solder was widely used in electronic packaging for aerospace devices due to its high reliability. However, its creep resistance is poor and can be improved by adding alloying elements. The effects of Sb content on the microstructure, tensile, and creep properties of eutectic SnPb solder were investigated. Sb addition effectively improved the mechanical properties of the SnPb solder. When Sb content exceeds 1.7 wt.%, SbSn intermetallic compounds (IMCs) occurred. And increasing the Sb content increased the tensile strength. Furthermore, Sb addition decreased the steady-state creep rate and increased the stress exponent n, suggesting that the creep resistance had been enhanced, which may be attributed to the hindrance of dislocation movement by SbSn IMCs, as well as the reduction in phase boundaries, which consequently reduced grain boundary sliding.Keywords
Funding Information
- National Natural Science Foundation of China (52271021, U2341262)
This publication has 47 references indexed in Scilit:
- Influence of small Sb nanoparticles additions on the microstructure, hardness and tensile properties of Sn–9Zn binary eutectic solder alloyJournal of Materials Science: Materials in Electronics, 2012
- The Shear Strength and Fracture Behavior of Sn-Ag-xSb Solder Joints with Au/Ni-P/Cu UBMJournal of Electronic Materials, 2008
- The correlation between stress relaxation and steady-state creep of eutectic Sn-PbJournal of Electronic Materials, 2005
- Impression creep characterization of 90Pb-10Sn microelectronic solder balls at subsolvus and supersolvus temperaturesJournal of Electronic Materials, 2005
- High creep resistance tin-based alloys for soldering applicationsJournal of Electronic Materials, 2002
- Creep of tin, Sb-solution-strengthened tin, and SbSn-precipitate-strengthened tinMetallurgical and Materials Transactions A, 2002
- Strength of tin-based soldered jointsJournal of Materials Science, 1992
- Effects of cooling rate on mechanical properties of near-eutectic tin-lead solder jointsJournal of Electronic Materials, 1991
- The strength of brass/Sn-Pb-Sb solder joints containing 0 to 10% SbJournal of Materials Science, 1986
- Creep in lead alloys. IIRussian Physics Journal, 1973