An Alternative Approach to LED Driver Design Based on High-Voltage Driving
- 18 May 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 31 (3) , 2465-2475
Abstract
This paper discusses an alternative approach to designing LED drivers based on high-voltage operation. Compared with the conventional approach of driving LEDs with low voltage and high current, the alternative approach aims to deliver the same power to LED load with high voltage and low current so that small and nonelectrolytic capacitor can be used. High-voltage operation also facilitates the use of simple PFC preregulators such as boost or SEPIC converters as single-stage LED drivers. This paper begins with the derivation of the relationship between the nominal output voltage and output capacitor's size of a PFC preregulator for achieving a given output voltage ripple's size, followed by a review of the recently emerged high-voltage LED packages suitable for the proposed application. This paper also discusses the flicker and colorimetric performances of LED light sources under the influence of large current ripple when nonelectrolytic capacitor is used. The method of third-harmonic current injection to the input current of LED drivers is also incorporated as an option for further reducing the output capacitor's size while meeting a specified flicker limit. Finally, a design example of high-voltage LED driver based on a boost PFC preregulator with third-harmonic current injection is presented and verified experimentally.Keywords
Funding Information
- University Grants Committee of the Hong Kong Special Administrative Region, Research Grants Council
- Theme-Based Research (Project T22-715/12-N)
- Earmarked Research (5185/11)
This publication has 21 references indexed in Scilit:
- A novel isolated electrolytic capacitor-less single-switch AC-DC offline LED driver with power factor correction2014
- Bridgeless electrolytic capacitor‐less valley‐fill AC/DC converter for offline Twin‐Bus light‐emitting diode lighting applicationIET Power Electronics, 2013
- A current ripple cancellation circuit for electrolytic capacitor-less AC-DC LED driver2013
- A Flicker-Free Electrolytic Capacitor-Less AC–DC LED DriverIEEE Transactions on Power Electronics, 2012
- Off-line LED driver for street lighting with an optimized cascade structure2012
- On the Limit of the Output Capacitor Reduction in Power-Factor Correctors by Distorting the Line Input CurrentIEEE Transactions on Power Electronics, 2012
- A long-life high-power-factor HPS-lamp LED retrofit converter based on the integrated buck-boost buck topology2011
- Analysis and Design of the Integrated Double Buck–Boost Converter as a High-Power-Factor Driver for Power-LED LampsIEEE Transactions on Industrial Electronics, 2011
- A Method of Reducing the Peak-to-Average Ratio of LED Current for Electrolytic Capacitor-Less AC–DC DriversIEEE Transactions on Power Electronics, 2009
- Means of Eliminating Electrolytic Capacitor in AC/DC Power Supplies for LED LightingsIEEE Transactions on Power Electronics, 2009