W(310) cold-field emission characteristics reflecting the vacuum states of an extreme high vacuum electron gun
Authors:
- 1 January 2013
- journal article
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 84 (1) , 013305
Abstract
An extremely high vacuum cold-field electron emission (CFE) gun operating at pressures ranging from ∼10−8 Pa to ∼10−10 Pa was constructed. Only the CFE current emitting from W(310) surfaces revealed the existence of a “stable region” with high current angular density just after tip flash heating. In the “stable region,” the CFE current was damped very slowly. The presence of non-hydrogen gas eliminated this region from the plot. Improvement of the vacuum prolonged the 90% damping time of the CFE current from ∼10 min to 800 min. The current angular density I′ of CFE current was 60 and 250 μA/sr in the “stable region” for total CFE currents of 10 and 50 μA, respectively. These results were about three times larger than I′ when measured after the complete damping of the CFE current. The CFE gun generated bright scanning transmission electron microscopy images of a carbon nanotube at 30 kV.Keywords
This publication has 6 references indexed in Scilit:
- Stabilization of a tungsten ⟨310⟩ cold field emitterJournal of Vacuum Science & Technology B, 2010
- Chapter 2 A Review of the Cold-Field Electron Cathode2009
- Measurement of pressures in 10−10Pa range from the damping speed of field emission currentApplied Physics Letters, 2007
- Stable field electron emission from a tungsten tip under the ultrahigh vacuum of 10−10 PaApplied Physics Letters, 1983
- Stabilization of field emission currentSurface Science, 1976
- Electron-Stimulated Desorption as a Tool for Studies of Chemisorption: A ReviewJournal of Vacuum Science and Technology, 1971