Hybrid Single Lap Joints between 3D Printed Titanium Lattices and CFRP Composites: Experimental and Numerical Insights
Open Access
Abstract
In the contemporary emphasis on weight reduction, the utilization of advanced materials like Carbon Fiber Reinforced Polymers (CFRPs) and cutting-edge technologies such as 3D printing of metal is increasingly crucial. This study delves into the junction of CFRP and titanium, aiming to conduct Single Lap shear tests on specimens featuring a co-lamination of long fiber composite onto a metal lattice structure. Different specimens with different dimensions of the Simple Cubic (SC) unit cell were subjected to testing. A microscope investigation facilitated an exploration of junction failure and epoxy resin infiltration into the lattice substrate. Employing an efficient 2D Finite Element Model, the homogenization process yielded theoretical models underestimating the Young Modulus by approximately 10% compared to real specimens. Despite the challenges in bonding titanium and CFRP, the novel junction exhibited a shear stress of 17.25 MPa, which is nearly equivalent to those of a co-lamination between sandblasted steel and CFRP, that is 17.15 MPa.Keywords
Funding Information
- European Union under NextGenerationEU
This publication has 25 references indexed in Scilit:
- Effect of CFRP surface topography on the adhesion and strength of composite-composite and composite-metal jointsComposites Part A: Applied Science and Manufacturing, 2022
- Characteristics of an improved boundary insert for sandwich panels with lattice truss coresAerospace Science and Technology, 2020
- Metallic microlattice and epoxy interpenetrating phase composites: Experimental and simulation studies on superior mechanical properties and their mechanismsComposites Part A: Applied Science and Manufacturing, 2020
- Adhesion enhancement and damage protection for carbon fiber-reinforced polymer (CFRP) composites via silica particle coatingComposites Part A: Applied Science and Manufacturing, 2018
- Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loadingActa Materialia, 2016
- Elastic Structures in Design2015
- Topology Optimization in Aircraft and Aerospace Structures DesignArchives of Computational Methods in Engineering, 2015
- Static strength of metal-composite joints with penetrative reinforcementComposite Structures, 2014
- A comparison of homogenization and standard mechanics analyses for periodic porous compositesComputational Mechanics, 1992
- The mechanical properties of epoxy resinsJournal of Materials Science, 1980