Effects of Tape Tension on Residual Stress in Thermoplastic Composite Filament Winding
Authors:
- Haibo LuHLHaibo Lu
- Martin SchlottermullerMSMartin Schlottermuller
- Ralf SchledjewskiRalf Schledjewski
- 1 November 2005
- journal article
- research article
- Published by SAGE Publications in Journal of Thermoplastic Composite Materials
- Vol. 18 (6) , 469-487
Abstract
Thermoplastic composite filament winding is a viable technique for manufacturing composite-reinforced pressure pipes and vessels. Residual stresses developed during the filament winding process have already received much attention in the past. Unreasonable residual stresses may result in distortion, matrix cracking, and interply delaminations. A model containing four submodels is developed in a previous research work. Some methods, such as adjusting tape tensions and temperatures are found to control the residual stress profile. The residual stress profile can be adjusted to a satisfactory level, which can avoid defects and even reduce weight and save material. Adjusting the tape tension is one of the parameters that controls the residual stress in thermoplastic composite filament winding. From a practical point of view, it is easy to realize even on an industrial scale. Experiments on two materials (glass fiber–polypropylene (G–PP) and carbon fiber–poly(ether-ether-ketone) (C–PEEK)) are made by using a variety of different tape tensions. The results proved the conclusions of theoretical work and agree well with the model predictions.Keywords
This publication has 12 references indexed in Scilit:
- Thermal Residual Stress Simulation in Thermoplastic Filament Winding ProcessJournal of Thermoplastic Composite Materials, 2003
- Analysis of Process-Induced Residual Stresses in Tape PlacementJournal of Thermoplastic Composite Materials, 2002
- Experimental and Computational Study of APC-2/AS4 Thermoplastic Composite C-RingsJournal of Thermoplastic Composite Materials, 2001
- Macro- and micro-impregnation phenomena in continuous manufacturing of fabric reinforced thermoplastic compositesComposites Part A: Applied Science and Manufacturing, 1998
- Matrix damage of fibrous composites: Effects of thermal residual stresses and layer sequencesComputers & Structures, 1997
- Design and Optimization of a Thermoplastic Tow-Placement Process with In-Situ ConsolidationJournal of Composite Materials, 1997
- Thermal residual stress analysis for in situ and post-consolidated composite ringsComposites Manufacturing, 1992
- Processing parameters for consolidating PEEK/carbon fiber (APC‐2) compositesPolymer Composites, 1992
- Thermal Analysis of in-situ Thermoplastic Composite Tape LayingJournal of Thermoplastic Composite Materials, 1991
- Filament Winding CylindersJournal of Composite Materials, 1990