Multi-Optimization Method for New Design of Angled Electrodes and Performance Enhancement Using Alloy Steel (X210)
Open Access
- 1 August 2024
- journal article
- research article
- Published by Walter de Gruyter GmbH in Management Systems in Production Engineering
- Vol. 32 (3) , 438-449
Abstract
Electrical Discharge Machining (EDM) process is considered as one of the ultimate famously process used in the components production like tools of surgical, dies, punch and aerospace. The EDM technique perform on the control of loss metal principle according to power as thermal-electric through the electrode and blank piece. Alloy steel (X210) was selected as a workpiece, whereas copper electrodes selected by in different angled electrodes (0°, 22.5°, 45°, 67.5°, and 90°). The technique of composite design (CCD) was applied in this work and accomplish (ANOVA) was concluded to consider the highly important variables. The experimental results show that the material removal rate is accelerate at highest value using Angle of Electrode (E A 67.5°) and (I 30A). Electrode Wear Rate (EWR) can be attained using (E A 22.5°) and (I 20A).Thickness of White Layer (WLT) is increased at (E A 22.5°) with enlarge current at maximum magnitude (30 A), minimize WLT is obviously at (E A 45°) and current is (15A). An optimization technique was utilize to conclude of optimal parameters at maximize MRR and consequently reduce EWR. The optimum values for the responses such as MRR and EWR with optimum value are gained with the following parameters: (E A 22.5°), (I 27), (P-on299) and (P-off 50).Keywords
This publication has 11 references indexed in Scilit:
- EDM Electrode Design and Analysis to Enhance Process PerformanceTikrit Journal of Engineering Sciences, 2023
- The Influence of Angled Electrodes on Various Characteristics in EDM Process - Review ArticleTikrit Journal of Engineering Sciences, 2023
- Experimental investigation of electrode wear assessment in the EDM process using image processing techniqueOpen Engineering, 2023
- An approach for machining curve cooling hole in plastic injection mold2022
- Machining of Zircaloy-2 using progressive tool design in EDMMaterials and Manufacturing Processes, 2022
- Effect of Tool Geometry on the Machining Characteristics amid SiC Powder Mixed Electric Discharge Drilling of Hybrid Metal Matrix CompositeSilicon, 2020
- Improving the Performance of EDM through Relief-Angled Tool DesignsApplied Sciences, 2020
- Electrode Wear Evaluation in E.D.M ProcessEngineering and Technology Journal, 2019
- Experimental Analysis of AA6063 Aluminium Alloy Machining by EDM with Hexagonal Shaped Tool ElectrodeMaterials Today: Proceedings, 2019
- Influence of Process Parameters and Electrode Geometry on Feature Micro-Accuracy in Electro Discharge Machining of Tool SteelMaterials and Manufacturing Processes, 2009