The Impact of Spinning Speed on n-TiO2/ZnO Bilayer Thin Film Fabricated through Sol–Gel Spin-Coating Method
Open Access
Abstract
The spinning speed parameter plays a crucial role in determining the properties of an n-TiO2/ZnO bilayer thin film fabricated using the sol–gel spin-coating technique, especially for solar cell applications. In this study, various spinning speeds were employed on an n-TiO2/ZnO bilayer thin film, and characterizations were conducted, such as morphological, structural, and optical properties. The findings revealed that the optimal conditions for the thin film were achieved at a spinning speed of 3000 rpm. Under this condition, a homogenous and compact surface morphology was observed, with an even distribution of ZnO grains. The successful fabrication of an n-TiO2/ZnO bilayer thin film was confirmed by the presence of characteristic peaks for both TiO2 and ZnO. Obviously, three dominant ZnO orientation peaks, which included (100), (002), and (101) were identified. The prevalence of the (002)-ZnO orientation plane indicated a high-quality structure with excellent crystallinity. In terms of optical properties, the achievement of high transmittance up to 75% resembles the high transparency of the thin film. The optical energy of the n-TiO2/ZnO bilayer thin film is estimated at 3.10 eV. In summary, the spinning speed parameter played a pivotal role in enhancing various properties of the thin film, making it a significant factor in its development for diverse applications.Keywords
Funding Information
- Multimedia University, Malaysia (MMU)
This publication has 43 references indexed in Scilit:
- Spin Speed and Duration Dependence of TiO2Thin Films pH Sensing BehaviorJournal of Sensors, 2016
- Characteristics of TiO2/ZnO bilayer film towards pH sensitivity prepared by different spin coating deposition processAIP Conference Proceedings, 2016
- A Comparative Study of Nanostructured TiO2, ZnO and Bilayer TiO2/ZnO Dye-Sensitized Solar CellsJournal of Electronic Materials, 2015
- Electrodeposited-oriented Cu2O Photovoltaic Device with Al:ZnOJournal of The Surface Finishing Society of Japan, 2015
- The importance of spinning speed in fabrication of spin-coated organic thin film transistors: Film morphology and field effect mobilityApplied Physics Letters, 2014
- Effects of spin speed on the properties of spin-coated Cu2ZnSnS4 thin films and solar cells based on DMSO solution2014
- Fabrication and Characterization of Spin-coated TiO2 FilmsEnergy Procedia, 2014
- Sonicated sol–gel preparation of nanoparticulate ZnO thin films with various deposition speeds: The highly preferred c-axis (002) orientation enhances the final propertiesJournal of Alloys and Compounds, 2014
- Fabrication of Multilayer ZnO/TiO2/ZnO Thin Films with Enhancement of Optical Properties by Atomic Layer Deposition (ALD)Applied Mechanics and Materials, 2013
- Electrical and Structural Properties of ZnO/TiO2 Nanocomposite Thin Films by RF Magnetron Co-SputteringAdvanced Materials Research, 2013