Abstract
Capacitive sensing circuit is one of the key technologies in the development of a series of deep space exploration instruments, such as inertial sensors in space gravitational wave detection mission and seismometers in planetary / lunar exploration programs. Space exploration missions require high precision, low-power and high-reliable capacitive sensing circuits. Although the traditional bridge-based capacitive detection circuits widely used currently behave high accuracy, they have a relatively complex structure and higher power consumption. In this paper, a charge-discharge differential capacitive sensing circuit based on high stability square-wave generator, ring-diode switch and low noise trans-impedance amplifier is proposed and investigated systematically. The system noise model is presented based on detailed analysis and measurement of the main noise sources. Low noise design optimization scheme is proposed based on the noise model. A prototype circuit is developed and tested. The sensitivities with several different excitation frequencies are calibrated. The measured noise is compared to the theoretical model and demonstrates a good consistency. The experimental results show that the noise equivalent capacitance resolution of this circuit reaches 0.24 aF/Hz1/2 at 0.1 Hz and 0.028 aF/Hz1/2 at 100 Hz. Benefitting from its simple structure and high measurement accuracy, it is highly suitable for space exploration instruments and other applications.
Funding Information
  • National Key Research and Development Program of China (2020YFC2200702, 2022YFC2204404, 2021YFC2202500)
  • National Natural Science Foundation of China (42274229)

This publication has 32 references indexed in Scilit: