Assessment of Hot Corrosion in Molten Na2SO4 and V2O5 of Inconel 625 Fabricated by Selective Laser Melting versus Conventional Technology
Open Access
Abstract
Inconel 625 samples, obtained by Selective Laser Melting (SLM) and conventional technology, were tested for hot corrosion resistance against a molten mixture of Na2SO4 and V2O5. The assessments were performed in air, at 900 °C with exposure time of up to 96 h, and at 1000 °C for 8 h. Weight gain was higher for samples obtained by SLM, with 37.4% after 8 h, 3.98% after 24 h, 4.46% after 48 h, and 5.8% after 96 h at 900 °C (22.6% at 1000 °C, 8 h). Three stages of corrosion were observed, the first and last with a high corrosion rate, while the second one showed a slower corrosion rate. Corrosion behaviour depends on the morphology of the grain boundary, which can influence the infiltration of corrosive salts, and on the formation of Cr2NiO4 compound, which acts as a temporary barrier.Keywords
Funding Information
- Romanian Ministry of Education, Research and Digitalization (2N/2019, 25PFE/30.12.2021)
This publication has 44 references indexed in Scilit:
- Revealing the relationship between grain size and corrosion rate of metalsScripta Materialia, 2010
- Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stabilityMaterials Science and Engineering: A, 2009
- Geometrical features and metallurgical characteristics of Nd:YAG laser drilled holes in thick IN718 and Ti–6Al–4V sheetsJournal of Materials Processing Technology, 2002
- Hot corrosion in gas turbine componentsEngineering Failure Analysis, 2002
- Hot corrosion of materials: a fluxing mechanism?Corrosion Science, 2002
- Machinability of nickel-base super alloys: a general reviewJournal of Materials Processing Technology, 1998
- A comparative study of oxidation and hot corrosion of a cast nickel base superalloy in different corrosive environmentsMaterials Letters, 1996
- Whitney Award Lecture—1986: Chemistry and Electrochemistry of the Hot Corrosion of MetalsCorrosion, 1986
- Hot Corrosion of High-Temperature AlloysAnnual Review of Materials Science, 1977
- Oxidation and hot corrosion of nickel-based alloys containing molybdenumCorrosion Science, 1976