Lithium-ion batteries face complex multi-physics degradation couplings that significantly affect their reliability and safety over the entire lifecycle. This paper develops a fully coupled and simplified electrochemical-thermal-mechanical-degradation model using a polynomial approximation method. It achieves voltage mean relative error (MRE) below 2% and temperature root mean square error within 1 °C in a 50Ah prismatic NMC/graphite battery. The electrode state of health (SOH) parameters have been validated, with majority MRE less than 5%. Based on this model, the effects of different temperatures, currents, and depth-of-discharge cycling on the proposed five reliability and safety parameters are revealed, including solid electrolyte interface (SEI) resistance, amount of lithium plating, particle structural damage, capacity fade and thermal safety. The results show that the SEI resistance initially decreases with the number of cycles due to interface optimization during the early aging stage. Approximately 25% active material loss in the graphite anode is identified as a threshold for significant SOH degradation. Moreover, low temperature dominates lithium plating and mechanical degradation, high temperature drives SEI thickening, and deep discharge coupled with high‑rate charging causes severe capacity fade and thermal risk in later aging stages. Finally, a SOH-staged management method considering main degradation risk and thermal safety over the full lifecycle is proposed. This work provides a practical framework for full‑life‑cycle battery reliability and safety assessment.