Study on the Improving the Uniformity of Ti Distribution in New Type of High J c Nb 3 Sn Wire Produced by WST

Authors:

Abstract
High Jc Nb3Sn superconducting wires is mainly used in the preparation of high field magnets because of its higher critical current density. Further improving the critical current density of Nb3Sn wire, reducing the use amount of wire in magnets is one of important ways to promote the industrialization and mass application of High Jc Nb3Sn wire. It is known that doping Ti in Nb3Sn phase can improve the critical magnetic field effectively, refine the Nb3Sn grains, and improve the critical current density. Too much or too little Ti will greatly reduce the doping effect. The Ti diffusion is later than the Nb3Sn phase reaction under three-zone section heat treatment, so the distribution of Ti in Nb3Sn phase is uneven. This paper introduces a new heat treatment process, which can improve the uniformity of Ti in Nb3Sn phase by adding an insulation platform between the medium temperature and high temperature insulation platform. Eventually, the critical current density of the High Jc Nb3Sn wire was improved, reaching 2938 A/mm2.
Funding Information
  • National Key Research and Development Program of China (2022YFB3804002, 2022YFF0707002)
  • Shaanxi province important project (2020zdzx04-04-01)

This publication has 17 references indexed in Scilit: