Influence of zinc (Zn) powder on the microhardness characteristic and microstructure properties of stainless steel SS304 hybrid joint using low power microwave heating
- 22 February 2024
- journal article
- research article
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 55 (2) , 225-239
Abstract
Microwave hybrid heating (MHH) process is a unique and novel approach of joint materials. Several lightweight materials (medium and high melting point) such as nickel, copper and aluminum have been successfully joined in the past research. However, small dimensions and low melting point of light weight materials such as zinc (Zn) metal or zinc (Zn) powder were always being a challenging mere for creating bond via any joining techniques. The sheets of stainless steel SS304 (17 mm×7.9 mm×0.2 mm) have been fabricated and joined at lap joint by using novel Microwave hybrid heating technique with mini heat chamber of 2.45 GHz of frequency and 200 W–360 W of microwave power, using pure zinc powder (99.9 %) as an interface material. Epoxy rate and exposure time have been varied from 10 % to 20 % and 2 min to 4 min, respectively. A developed heat chamber has been set in domestic microwave oven properly as proposed. To evaluate the microstructure correlation and microhardness at joint interface, the field emission scanning electron microscopy (FESEM – EDS), x‐ray diffraction (XRD) and Vickers hardness were used. For the experimental studies, it had found an excellent bonding was produced at interface layer between the upper and lower sections with good penetration rate of 360 W of microwave power, 4 min of exposure time and 20 % of epoxy rate as the 183.1 HV 0.05 of excellent microhardness and the intermetallic phase of iron‐zinc (FeZn11), nickel‐zinc (NiZn) and nickel‐zinc (NiZn3) were observed at interface layer.Keywords
This publication has 27 references indexed in Scilit:
- Application of Taguchi method and ANOVA analysis for optimization of process parameters and exothermic addition (CuO-Al) introduction in the core filler during self-shielded flux-cored arc weldingThe International Journal of Advanced Manufacturing Technology, 2021
- Liquid Metal Embrittlement Cracking During Resistance Spot Welding of Galvanized Q&P980 SteelMetallurgical and Materials Transactions A, 2019
- An investigation on joining of Al6061-T6 to AZ31B by microwave hybrid heating using active braze alloy as an interlayerJournal of Manufacturing Processes, 2017
- Effects of powder size of interface material on selective hybrid carbon microwave joining of SS304–SS304Journal of Manufacturing Processes, 2017
- Structure–Property Correlations in Microwave Joining of Inconel 718JOM, 2015
- RETRACTED ARTICLE: Effect of Process Parameters on Tensile Strength of 1018 Mild Steel Joints Fabricated by Microwave WeldingMetallography, Microstructure, and Analysis, 2014
- Metallurgical and mechanical characterization of mild steel-mild steel joint formed by microwave hybrid heating processSādhanā, 2013
- Microwave food processing—A reviewFood Research International, 2013
- Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sinteringInternational Journal of Machine Tools and Manufacture, 2007
- Lead-free interconnect technique by using variable frequency microwaveJournal of Electronic Materials, 2005