Enhancement of strength and stiffness of Nylon 6 filaments through carbon nanotubes reinforcement
- 20 February 2006
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 88 (8) , 083119
Abstract
We report a method to fabricate carbon nanotube reinforced Nylon filaments through an extrusion process. In this process, Nylon 6 and multiwalled carbon nanotubes (MWCNT) are first dry mixed and then extruded in the form of continuous filaments by a single screw extrusion method. Thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC) studies have indicated that there is a moderate increase in Tg without a discernible shift in the melting endotherm. Tensile tests on single filaments have demonstrated that Young’s modulus and strength of the nanophased filaments have increased by 220% and 164%, respectively with the addition of only 1wt.% MWCNTs. SEM studies and micromechanics based calculations have shown that the alignment of MWCNTs in the filaments, and high interfacial shear strength between the matrix and the nanotube reinforcement was responsible for such a dramatic improvement in properties.Keywords
This publication has 17 references indexed in Scilit:
- Infusion of SiC Nanoparticles Into SC‐15 Epoxy: An Investigation of Thermal and Mechanical ResponseMacromolecular Materials and Engineering, 2005
- Continuous Spinning of a Single-Walled Carbon Nanotube−Nylon Composite FiberJournal of the American Chemical Society, 2005
- MANUFACTURING AND CHARACTERIZATION OF CARBON NANOTUBE/POLYETHYLENE COMPOSITESInternational Journal of Nanoscience, 2005
- Fabrication and mechanical characterization of carbon/SiC-epoxy nanocompositesComposite Structures, 2005
- Response of sandwich composites with nanophased cores under flexural loadingComposites Part B: Engineering, 2004
- Fabrication, synthesis and mechanical characterization of nanoparticles infused polyurethane foamsComposites Part A: Applied Science and Manufacturing, 2004
- Aligned multi-walled carbon nanotube-reinforced composites: processing and mechanical characterizationJournal of Physics D: Applied Physics, 2002
- Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrixComposites Science and Technology, 2002
- Aligned single-wall carbon nanotubes in composites by melt processing methodsChemical Physics Letters, 2000
- Alignment of carbon nanotubes in a polymer matrix by mechanical stretchingApplied Physics Letters, 1998