Evaluation of Passive Films on 17-7PH and 410 Stainless Steel Exposed to NaCl Solution
Open Access
Abstract
This work covers the formation of a passive state for two different alloys used in the aeronautical industry. The aim of this study is to investigate the effectiveness of passivation treatments on 17-7PH and 410 SS (stainless steel) samples, specifically when performed with citric and nitric acid solutions at 49 °C using an immersion time of 90 min and subsequent exposure in 3.5 wt.% NaCl solution. Employing the cyclic potentiodynamic polarization (CPP) technique, the corrosion properties of the passivated material were evaluated according to the ASTM G65-11 standard. A microstructural analysis was performed using scanning electron microscopy (SEM). The passivated layer was characterized via X-ray photoelectron spectroscopy. In the results, the CPP curves showed positive hysteresis, indicating pitting localized corrosion, and 17-7PH steel passivated at 49 °C for 90 min in citric acid exhibited lower corrosion rate values equivalent to ×10−3 mm/year.Keywords
This publication has 64 references indexed in Scilit:
- Localized corrosion of 15–5 PH and 17–4 PH stainless steel in NaCl solutionJournal of Solid State Electrochemistry, 2023
- Novel sucrose derivative as a thermally stable inhibitor for mild steel corrosion in 15% HCl medium: An experimental and computational studyChemical Engineering Journal, 2022
- Aerospace Alloys2020
- Achieving the broader frequency electromagnetic absorber by development of magnetic core-shell composite with tunable shell/core sizesApplied Surface Science, 2018
- Analysis of electrochemical noise data in both time and frequency domains to evaluate the effect of ZnO nanopowder addition on the corrosion protection performance of epoxy coatingsArabian Journal of Chemistry, 2016
- A XPS study of the Mo effect on passivation behaviors for highly controlled stainless steels in neutral and alkaline conditionsApplied Surface Science, 2013
- Stability of spontaneous passive films on high strength Mo-containing stainless steels in aqueous solutionsJournal of Applied Electrochemistry, 2007
- Electrochemical behaviour of Mo‐containing austenitic stainless steels in buffer solutionMaterialwissenschaft und Werkstofftechnik, 2004
- Investigation of passive layers on iron and iron-chromium alloys by electrochemical impedance spectroscopyElectrochimica Acta, 1993
- Stochastic studies of passivity breakdownCorrosion Science, 1990