Investigating the correlation between ultrasonic pulse velocity and compressive strength in polyurethane foam concrete
Open Access
- 5 July 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-16
Abstract
Using waste polyurethane foam as a partial replacement for natural coarse aggregates in concrete provides an eco-friendly solution by reducing waste and conserving natural resources. However, the strength behavior of polyurethane foam concrete differs from conventional concrete. To ensure effective design and quality control in the field, the viability of non-destructive testing methods for finding out the in situ mechanical properties of polyurethane foam concrete must be evaluated. This study establishes a correlation between compressive strength and ultrasonic pulse velocity (UPV) test to predict the compressive strength of polyurethane foam concrete using UPV test results. An experimental study was conducted on concrete specimens with varying percentages of polyurethane foam replacing natural coarse aggregate, ranging from 10 to 60% in 10% increments. The control concrete mix was 100% natural coarse aggregate without polyurethane foam. The properties of the specimens were evaluated after curing for 7, 14, and 28 days. It also examines polyurethane foam concrete workability, density, and microstructural properties. The findings show that the UPV and compressive strength of polyurethane foam concrete were lower than those of the control mix concrete for all replacement levels and curing ages. The empirical relationships between compressive strength and UPV were found to be exponential, with high correlation values ranging from 0.9012 to 0.9998. The predicted values and the experimentally measured results were compared in order to confirm the accuracy of the empirical equations for compressive strength prediction.Keywords
Funding Information
- Vellore Institute of Technology, Chennai
This publication has 52 references indexed in Scilit:
- Utilisation of solid waste polyurethane foam as coarse aggregate in concrete: an experimental study with ecological and cost assessmentJournal of Material Cycles and Waste Management, 2024
- Performance of structural lightweight concrete produced by utilizing high volume of fly ash cenosphere and sintered fly ash aggregate with silica fumeCleaner Engineering and Technology, 2021
- Construction Applications of Polyurethane Foam Wastes2018
- Life Cycle Analysis of Polyurethane Foam Wastes2018
- Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA)Composites Part B: Engineering, 2013
- Lightweight plaster materials with enhanced thermal properties made with polyurethane foam wastesConstruction and Building Materials, 2012
- Valorization of coarse rigid polyurethane foam waste in lightweight aggregate concreteConstruction and Building Materials, 2010
- Proportioning and characterization of lightweight concrete mixtures made with rigid polyurethane foam wastesCement and Concrete Composites, 2008
- Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concreteCement and Concrete Research, 2004
- Microstructure of the interfacial zone between lightweight aggregate and cement pasteCement and Concrete Research, 1990