SMSenthilpandian Mariappan

Senthilpandian Mariappan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Senthilpandian Mariappan has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Steel mill scale in concrete and mortar: a critical review of the evidence base and a proposed framework for future quantitative synthesis

    by G. Loganathan, M. Senthil Pandian, S. Deepa Nivethika

    Steel mill scale is an iron-oxide-rich by-product of hot rolling that is generated at roughly 1%–3% of the mass of steel processed and is still largely landfilled or downcycled. Its high iron content, high specific gravity and fine flake morphology have prompted a growing number of laboratory investigations into its use in concrete and mortar, principally as a partial replacement for fine aggregate and, far more rarely, for cement. This article critically reviews that literature. Rather than presenting a pooled quantitative synthesis, it establishes why such a synthesis is not yet defensible and specifies the conditions under which it would become so. We first characterise mill scale as a material, drawing a distinction—routinely blurred in the construction-materials literature—between X-ray fluorescence compositions, in which all iron is reported arithmetically as Fe 2 O 3 , and X-ray diffraction phase quantifications, which resolve the wüstite (FeO), magnetite (Fe 3 O 4 ) and hematite (Fe 2 O 3 ) actually present. We then map the reported effects of mill scale on workability, compressive and tensile strength, transport-related durability and environmental behaviour, and show that the reported optimum replacement level is not consistent across the corpus, clustering near 15% by volume in mortar and self-compacting concrete but near 50%–60% by mass in several conventional concrete studies. Quantitative pooling is currently obstructed by six specific and documentable deficiencies: heterogeneous replacement bases (mass versus volume; aggregate versus binder), inconsistent curing ages and outcome definitions, uncharacterised variation in mill-scale provenance, near-universal absence of dispersion statistics and replicate counts, confounding of mill scale with co-additives, and probable non-independence among studies from single research groups. We therefore present a pre-specified meta-analytic protocol—effect-size definition, random-effects estimation, heterogeneity quantification, subgroup and meta-regression structure, sensitivity analysis and small-study-effect assessment—to be executed once the reporting deficiencies identified here are remedied, together with a minimum reporting checklist for primary studies. The evidence currently supports cautious use of mill scale in non-structural and specialty applications; it does not yet support quantitative performance benchmarks for structural concrete.

  • Open Access

    Effect of graphite powder on the mechanical, durability and electromagnetic shielding performance of cement mortar incorporating ball-milled waste iron mill scale

    by G. Loganathan, M. Senthil Pandian, S. Deepa Nivethika

    The rapid growth of wireless communication systems, radar technologies, and electronic devices has increased the demand for cementitious materials capable of mitigating electromagnetic interference (EMI) while maintaining adequate structural performance. This study investigates the influence of graphite powder on the mechanical, durability, and electromagnetic shielding performance of cement mortar incorporating a fixed 15% replacement of ball-milled waste iron mill scale. Graphite powder was incorporated at 0–5% by weight of cement. The effects of graphite content on flowability, mechanical properties, durability, electromagnetic shielding effectiveness, and microstructure were systematically evaluated. Compared with the control mix, the incorporation of 2% graphite powder increased the 28-day compressive, flexural, and tensile strengths by approximately 7.2%, 10.6%, and 13.0%, respectively, while simultaneously reducing water absorption, chloride permeability, and sulphate deterioration, indicating improved durability. Electromagnetic shielding effectiveness increased progressively with graphite content, reaching a maximum of 45.4 dB in the X-band frequency range. However, under the fixed 15% ball-milled waste iron mill scale replacement condition, the BW15-G2 mix provided the optimum balance between mechanical performance, durability, and electromagnetic shielding effectiveness, achieving 37.6 dB shielding performance. SEM observations revealed a denser matrix with refined pore structure, while XRD qualitatively indicated enhanced hydration product development in the optimized mix. Response surface methodology demonstrated that curing period predominantly influenced strength development, whereas graphite content governed matrix refinement and overall performance. The developed models and optimum graphite content are applicable only within the investigated fixed 15% ball-milled waste iron mill scale replacement level. The developed multifunctional cement mortar shows promising potential for EMI-sensitive infrastructure, including hospitals, data centres, telecommunication facilities, and defence structures.

  • Mechanical and Microstructural Evaluation of Cement Mortar Incorporating Ball-Milled Iron Mill Scale Using Response Surface Modelling

    by Loganathan G, SenthilPandian M

    Incorporating industrial by-products into cementitious materials provides a sustainable solution to reduce the reliance on natural aggregates. This study investigates the feasibility of using ball-milled waste iron mill scale (B-WIMS) as a partial replacement (0–30%) for fine aggregate in cement mortar. Mechanical properties, microstructural characteristics, and sustainability indicators were evaluated using a two-factor Response Surface Methodology (RSM) framework considering B-WIMS content and curing periods of 3, 7, and 28 days. The results show that an optimum replacement level of 15% B-WIMS achieves superior performance, with compressive, flexural, and tensile strengths of 50.1 MPa, 8.5 MPa, and 4.6 MPa at 28 days, respectively, representing significant improvements over the control mix. Microstructural analysis using SEM, XRD, and FTIR suggests the formation of a denser matrix with improved particle packing and reduced portlandite content. Phase identification was primarily supported by XRD, while SEM provided complementary morphological insights. ANOVA results indicate that curing period is the most influential factor governing strength development (p < 0.0001), while B-WIMS content shows significant quadratic effects. The developed models demonstrated strong predictive capability (R² = 0.78–0.98). Despite a slight increase in embodied energy, improved strength-to-energy and strength-to-carbon ratios confirm enhanced eco-efficiency. Overall, B-WIMS offers a promising approach for sustainable mortar development.


  • Open Access

    Axial load behaviour of concrete infilled and partially encased cold formed double sigma composite columns

    by R. P. Olive Sharon, M. Senthilpandian

    This study presents a comparative experimental investigation on the structural behaviour of concrete-infilled and partially encased cold-formed steel composite columns (CFSCC) incorporating Basalt Fibre Reinforced Self-Compacting Concrete (BFRSCC). Two built-up column configurations are fabricated using sigma sections: a face-to-face (closed) arrangement fully infilled with BFRSCC, and a back-to-back (open) arrangement partially encased with BFRSCC. Axial compression tests are performed to evaluate and compare the load-bearing capacity, axial shortening, ductility, and failure mechanisms of the two systems. The results show that the incorporation of basalt fibres enhances axial performance in both configurations due to improved confinement, crack bridging, and bond behaviour at the steel-concrete interface. The closed BFRSCC-infilled column (CI-BFRSCC) exhibits superior performance, carrying approximately 1.25 times the load of the partially encased counterpart (PE-BFRSCC) and demonstrating greater ductility, attributed to the uniformly confined concrete core and delayed local buckling. The experimental results are validated through ABAQUS finite element simulations, which show good agreement in ultimate strength and failure modes, confirming that the developed numerical model is reasonable and feasible. Since no dedicated design provisions exist for CFSCC with BFRSCC, the experimental results are compared with predictions from IS 11,384 (2022) as well as international design standards, including Eurocode 4, AISC 360 − 16, and AS/NZS 2327. The modified theoretical approach yields slightly conservative yet reliable predictions, with (Pu, Exp / Pu, The) values ranging from 0.85 to 1.27 across all codes, confirming its suitability for axial strength prediction. A Life-Cycle Assessment (LCA) is further conducted to quantify the embodied carbon emissions of all column types across production to end-of-life stages. The findings indicate that BFRSCC columns achieve a favourable balance between mechanical performance and environmental impact. Overall, the study demonstrates the suitability of BFRSCC for enhancing the strength, ductility, and sustainability of CFS composite columns, supporting their application in structures requiring high energy absorption and improved life-cycle efficiency.


  • Open Access

    Enhancing impact resistance of concrete slabs

    by Hemanth Kumar Anbu, Udhayanithi P., Karthikeyan Kothandapani, Senthilpandian M.

    The impact resistance of concrete slabs was investigated through a comparative experimental analysis of Conventional Concrete (CC) and Steel Fiber Reinforced Concrete (SFRC), with a focus on dynamic performance using the Ratio of Crack Resistance (Rcr) as a core evaluative metric. The research...


  • Open Access

    Investigating the correlation between ultrasonic pulse velocity and compressive strength in polyurethane foam concrete

    by R. Roobankumar, M. SenthilPandian

    Using waste polyurethane foam as a partial replacement for natural coarse aggregates in concrete provides an eco-friendly solution by reducing waste and conserving natural resources. However, the strength behavior of polyurethane foam concrete differs from conventional concrete. To ensure effective design and quality control in the field, the viability of non-destructive testing methods for finding out the in situ mechanical properties of polyurethane foam concrete must be evaluated. This study establishes a correlation between compressive strength and ultrasonic pulse velocity (UPV) test to predict the compressive strength of polyurethane foam concrete using UPV test results. An experimental study was conducted on concrete specimens with varying percentages of polyurethane foam replacing natural coarse aggregate, ranging from 10 to 60% in 10% increments. The control concrete mix was 100% natural coarse aggregate without polyurethane foam. The properties of the specimens were evaluated after curing for 7, 14, and 28 days. It also examines polyurethane foam concrete workability, density, and microstructural properties. The findings show that the UPV and compressive strength of polyurethane foam concrete were lower than those of the control mix concrete for all replacement levels and curing ages. The empirical relationships between compressive strength and UPV were found to be exponential, with high correlation values ranging from 0.9012 to 0.9998. The predicted values and the experimentally measured results were compared in order to confirm the accuracy of the empirical equations for compressive strength prediction.