Electrocoagulation process for oily wastewater treatment and optimization using response surface methodology
Open Access
- 1 June 2023
- journal article
- research article
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (12) , 13859-13872
Abstract
Electrocoagulation technique using aluminum electrodes in a batch bi-polar system was investigated to determine the efficiency of removing oil from oily wastewater. The Box–Behnken design was utilized to optimize conditions and the effects of four independent factors, including oil volume (X1), temperature (X2), initial pH (X3), and treatment time (X4),—were examined to investigate turbidity recovery and conductivity changes. The significant independent variables and their interactions were assessed using ANOVA. The optimal operating conditions for turbidity removal were obtained at an oil volume of 10 ml L−1, a temperature of 28 °C, an initial pH of 4, and a coagulation time of 90 min. The results revealed that turbidity removal and conductivity changes are enhanced significantly with increasing treatment time and decreasing oil volume. The application of the treatment process under optimal operating conditions allows promising removal efficiencies of 97.3%, and 73.4% for turbidity and conductivity, respectively. Also, the treated wastewater showed remarkable changes in removal efficiencies of the main oily wastewater pollution loads for COD, NO2, PO4, DO, and BOD. The economic study indicated that oily wastewater treatment by electrocoagulation is a very cost-effective technique.Keywords
Funding Information
- National Institute of Oceanography & Fisheries
This publication has 40 references indexed in Scilit:
- Modeling and Optimization of New Flocculant Dosage and pH for Flocculation: Removal of Pollutants from WastewaterWater, 2013
- Treatment of the industrial wastewaters by electrocoagulation: Optimization of coupled electrochemical and sedimentation processesDesalination, 2010
- Turbidity as an Indicator of Water Quality in Diverse Watersheds of the Upper Pecos River BasinWater, 2010
- Using electrocoagulation–electroflotation technology to treat synthetic solution and textile wastewater, two case studiesDesalination, 2010
- Electrocoagulation of vegetable oil refinery wastewater using aluminum electrodesJournal of Environmental Management, 2009
- Optimization of oil removal from oily wastewater by electrocoagulation using response surface methodJournal of Hazardous Materials, 2008
- Treatment of the baker's yeast wastewater by electrocoagulationJournal of Hazardous Materials, 2008
- A Comparison of Iron and Aluminium Electrodes in Hydrogen Peroxide-Assisted Electrocoagulation of Organic PollutantsEnvironmental Engineering Science, 2008
- Assessment of alternative management techniques of tank bottom petroleum sludge in OmanJournal of Hazardous Materials, 2007
- Treatment of potato chips manufacturing wastewater by electrocoagulationDesalination, 2006