The influence of lubricant formulation on early thrust and radial bearing damage associated with white etching cracks
Authors:
- 12 July 2020
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 235 (5) , 1047-1059
Abstract
In the past, results have shown the influence of oil-additive systems in the life of rolling bearings, also hypotheses have been formulated on the influence of lubricant formulation on the development of early bearing damage associated with white etching cracks. In some earlier work of the authors with different operating conditions, early damage, and white etching cracks had been generated by mechanical stresses. In this study, tests with custom-made lubricants have been performed on thrust as well as radial bearings to clarify some assumptions. The tested oils differ only by the presence of three additives, but only one oil has led systematically to white etching cracks despite the fact that both oils lead to similar mechanical stresses. The results confirm that under mixed lubrication conditions with certain lubricant formulations, early damage, in particular white etching cracks, can be influenced by the oil-additive system likely affecting the bearing steel. Hypotheses are formulated and the influence of different parameters is discussed. This paper, combined with earlier work of the authors, confirms that the understanding and solution to an early bearing damage associated with white etching cracks can only be validated using the appropriate test method.Keywords
This publication has 30 references indexed in Scilit:
- White Etching Crack Root Cause InvestigationsTribology Transactions, 2014
- Investigations of Bearing Failures Associated with White Etching Areas (WEAs) in Wind Turbine GearboxesTribology Transactions, 2013
- Micropitting Performance of Oil Additives in Lubricated Rolling ContactsTribology Transactions, 2013
- The Composition of Reaction Layers on Rolling Bearings Lubricated with Gear Oils and Its Correlation with Rolling Bearing PerformanceTribology Transactions, 2012
- Effect of lubricant additives in rolling contact fatigueProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2010
- Film thickness and roughness of ZDDP antiwear filmsTribology Letters, 2007
- Study on Mechanism of Hydrogen Generation from LubricantsTribology Transactions, 2006
- The influence of hydrogen on rolling contact fatigue life and its improvementJSAE Review, 2003
- The Effect of Extreme Pressure (EP) Lubricants on the Life of Rolling Element BearingsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 1994
- Predicting the Effects of Lubricant Chemistry on Bearing Fatigue LifeA S L E Transactions, 1983