Ultrasonic welding of lap joints of PEI plates with PEI/CF-fabric prepregs
Open Access
- 15 March 2024
- journal article
- research article
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 18 (68) , 390-409
Abstract
In this study, ultrasonic welding (USW) of lap joints of polyetherimide (PEI) plates (adherends) with carbon fiber (CF) prepregs impregnated with PEI was investigated. No energy director (ED) was used, so binder contents were varied in the prepregs to compensate for the lack of the polymer in the fusion zone. In addition, the effect of the USW parameters on the structure and the mechanical properties of the lap-joints were analyzed. The most homogeneous macrostructure, the maintained structural integrity of both the CF-fabric in the prepregs and the lap-joined PEI adherends, as well as the maximum strength properties (tensile strength) were revealed for the USW joints with the minimum polymer content in the prepreg. In this case, rising the USW time from 400 up to 800 ms radically changed the macrostructure of the fusion zone, while the strength properties did not vary significantly (shear stresses were 42–48 MPa). Computer simulation of the influence of the PEI/CF-fabric ratios in the prepregs on the deformation response of the USW joints showed that the prepreg thicknesses and, accordingly, the PEI/CF ratios did not exert a noticeable effect on the strain–stress (tensile) diagrams, while the determining factor was the adhesion level.Keywords
This publication has 33 references indexed in Scilit:
- Experimental and Numerical Studies on the Tensile Strength of Lap Joints of PEEK Plates and CF Fabric Prepregs Formed by Ultrasonic Welding2023
- Shear and tensile joint strengths of carbon fiber-reinforced thermoplastics using ultrasonic weldingComposites Part A: Applied Science and Manufacturing, 2019
- Ultrasonic welding of carbon/epoxy and carbon/PEEK composites through a PEI thermoplastic coupling layerComposites Part A: Applied Science and Manufacturing, 2018
- Ultrasonic strengthening improves tensile mechanical performance of fused deposition modeling 3D printingThe International Journal of Advanced Manufacturing Technology, 2018
- Modeling of continuous ultrasonic impregnation and consolidation of thermoplastic matrix compositesComposites Part A: Applied Science and Manufacturing, 2016
- Introduction to power ultrasonics2015
- Ultrasonic welding of advanced thermoplastic composites: An investigation on energy‐directing surfacesAdvances in Polymer Technology, 2010
- Mechanics of Composite Structural Elements2004
- Effects of the shape of the energy director on far‐field ultrasonic welding of thermoplasticsPolymer Engineering & Science, 2000
- Heating and bonding mechanisms in ultrasonic welding of thermoplasticsPolymer Engineering & Science, 1983