Positioning Error Limits and Noise Analysis in Hybrid MZ-Sagnac Interferometric Distributed Optical Fiber Sensing System
- 25 October 2024
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (5) , 2438-2448
Abstract
In hybrid MZ-Sagnac interferometric distributed optical fiber sensing system, positioning accuracy is crucial for practical engineering applications. Beyond identifying disturbance locations, quantifying positioning error is essential to evaluate the reliability of the results, which is critical for real-world engineering. In this paper, the factors influencing positioning error is analyzed, and a comprehensive assessment of the system accuracy is provided. The Cramer-Rao lower bound and correlator performance estimate methods are employed to evaluate positioning accuracy. The analysis reveals that positioning error is influenced by the signal-to-noise ratio (SNR) and signal bandwidth, and system noise is served as a key limiting factor. Various noise sources are analyzed, and strategies for noise mitigation are discussed. A theoretical derivation of noise propagation is conducted, leading to the determination of the minimum detectable phase. The experimental setup involves measuring system noise and evaluating positioning performance by placing the optical fiber in a soundproof room and introducing external disturbances at various positions along the fiber. Results show that the system phase noise level is measured at approximately 10 -5 rad at 1 kHz. With a sensing fiber length of 70 km and an SNR of 30 dB, the positioning error for signals with varying bandwidths is demonstrated to be less than 10 m.Keywords
Funding Information
- Science and Technology Commission of Shanghai Municipality (17DZ2280600)
This publication has 33 references indexed in Scilit:
- Acceleration of the frequency-shift demodulation in phase-sensitive OTDRMeasurement Science and Technology, 2023
- Signal identification based on modified filter bank feature and generalized regression neural network for optical fiber perimeter sensingOptical Fiber Technology, 2022
- Study on multi‐time reflection induced by in‐line fiber connector in engineering applied distributed single‐fiber interferometer sensing systemMicrowave and Optical Technology Letters, 2020
- Evaluation of the fused silica thermal conductivity by comparing infrared thermometry measurements with two-dimensional simulationsApplied Physics Letters, 2012
- Intrinsic thermal noise of optical fibres due to mechanical dissipationElectronics Letters, 2010
- Effect of intensity noise of semiconductor lasers on the digital modulation characteristics and the bit error rate of optical communication systemsJournal of Applied Physics, 2008
- Fiber optic in-line distributed sensor for detection and localization of the pipeline leaksSensors and Actuators A: Physical, 2007
- Modified sagnac/mach-zehnder interferometer for distributed disturbance sensingMicrowave and Optical Technology Letters, 1999
- Fundamental phase noise limit in optical fibres due to temperature fluctuationsElectronics Letters, 1992
- Guided acoustic-wave Brillouin scatteringPhysical Review B, 1985